Overview
The ZF 4657.183.181 LOOSE PARTS for WG210 is a critical OEM genuine component designed for the internal assembly of the WG 210 Series transmission. This kit functions as a collection of essential fasteners, seals, and positioning elements that secure key housing sections and internal guides within the gearbox. Specifically, it works in conjunction with the TRANSMISSION HOUSING to maintain structural integrity under high torque loads. The SKU 4657.183.181 is engineered to exact ZF tolerances, ensuring that all loose parts within the clutch and planetary gear sets remain correctly seated during operation. Without this kit, the transmission cannot maintain proper alignment of the HOUS.FRONT SECT and rear sections, leading to premature wear.
Symptoms of Failure
- Oil leaks around the housing seam: When the 4657.183.181 loose parts degrade, the sealing elements fail, causing transmission fluid to weep from the joint between the HOUSING REAR PART and the main casing.
- Gear slipping under load: Worn positioning pins or bolts allow the HOUSING REAR SECTION to shift slightly, resulting in erratic gear engagement and power loss during acceleration.
- Unusual vibration or rattle: Loose fasteners cause internal components to vibrate against the housing, producing a distinct metallic noise that worsens at higher RPMs.
- Hard shifting or delayed engagement: Misalignment from degraded loose parts prevents the valve body from actuating clutches cleanly, leading to harsh or delayed gear changes.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 4657.183.181 |
| OEM Reference | ZF 4657.183.181 |
| Material | Steel alloy / Nitrile rubber (seals) |
| Weight | 0.45 kg (estimated) |
| Dimensions | Various (bolts: M8-M12; pins: 6mm-10mm) |
| Compatible Series | WG 210, WG 200, WG 180 |
Compatibility
This ZF 4657.183.181 LOOSE PARTS kit is primarily designed for the WG 210 Series transmission, but it also fits the WG 200 and WG 180 models due to shared housing architecture. It is essential for any rebuild involving the TRANSMISSION HOUSING or the HOUS.FRONT SECT. Always verify your transmission serial number before ordering, as variations exist in older WG 180 units. This kit replaces all loose hardware in the main housing assembly, including bolts, pins, and sealing washers.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101082 | TRANSMISSION HOUSING | Main structural casing for gear sets |
| 4657201166 | HOUS.FRONT SECT | Front section housing for input shaft |
| 4657201170 | HOUSING REAR PART | Rear housing cover for output bearing |
| 4657298102 | HOUSING REAR SECTION | Intermediate rear housing segment |
| 0631306816 | CYLINDRICAL PIN | Alignment pin for housing sections |
| 0636100801 | CAP SCREW | Fastener for housing bolts |
| 4656301148 | FIXING PLATE | Retains bearing in housing |
| 4657301032 | SCREEN SHEET | Filter screen for oil sump |
| 4657301033 | SCREEN SHEET | Secondary filter screen |
| 0636100803 | CAP SCREW | Alternate fastener for rear housing |
