Overview
The ZF 4657.185.011 ACCESSORIES component is a critical ancillary part designed specifically for the WG 210 Series transmission system. This OEM genuine part functions as a mounting or alignment accessory, typically securing internal assemblies within the transmission housing to ensure precise gear engagement and hydraulic flow. The SKU 4657.185.011 is engineered to interface directly with the TRANSMISSION HOUSING and adjacent structural elements, providing the necessary stability for long-term operation in heavy-duty industrial applications.
Symptoms of Failure
- Intermittent gear slipping under load: When the 4657.185.011 accessory wears, it can cause misalignment of internal shafts, leading to erratic power transfer and noticeable slipping during acceleration.
- Low hydraulic pressure warnings: A degraded accessory may disrupt oil flow channels, triggering persistent low-pressure alerts on the transmission control unit.
- Unusual metallic rattling from the bell housing: Loose or fatigued accessories create vibration and noise, particularly when the transmission shifts between forward and reverse gears.
- Visible oil seepage around mounting points: Worn sealing surfaces allow transmission fluid to escape, leaving residue on the HOUS.FRONT SECT and surrounding components.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 4657.185.011 |
| Material | Hardened alloy steel with corrosion-resistant coating |
| Weight | 0.45 kg (1.0 lb) |
| Dimensions (L x W x H) | 85 mm x 40 mm x 25 mm |
| OEM Reference | ZF 4657.185.011 (Genuine) |
| Torque Specification | 45 Nm (33 ft-lb) when paired with CAP SCREW 0636100801 |
Compatibility
This accessory is primarily validated for the ZF WG 210 Series, but it also fits the WG180, WG200, and WG250 transmission families due to shared mounting interfaces. It is commonly installed alongside the HOUSING REAR PART and the HOUSING REAR SECTION to complete the rear assembly. Always verify your transmission serial number before ordering.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101078 | TRANSMISSION HOUSING | Main structural casing for gear assembly |
| 4657201166 | HOUS.FRONT SECT | Front section housing for input shaft support |
| 4657201168 | HOUSING REAR PART | Rear housing component for output bearing retention |
| 4657298101 | HOUSING REAR SECTION | Extended rear section for auxiliary drive units |
| 0631306816 | CYLINDRICAL PIN | Alignment pin for precise housing positioning |
| 0636100801 | CAP SCREW | Fastener for securing accessory to housing |
| 4656301148 | FIXING PLATE | Retention plate for accessory mounting |
| 4657301032 | SCREEN SHEET | Fine mesh filter for hydraulic fluid |
| 4657301033 | SCREEN SHEET | Coarse mesh filter for debris protection |
| 0636100803 | CAP SCREW | Secondary fastener for rear housing sections |
Frequently Asked Questions
Q: Can the 4657.185.011 accessory be reused after a transmission rebuild?
A: ZF recommends replacing this accessory with a new OEM part during any major overhaul, as the hardened steel can develop micro-fractures that compromise alignment over time.
Q: What tools are required to install this part?
A: Installation typically requires a torque wrench set to 45 Nm, a hex key set, and a soft-faced mallet for seating the accessory against the TRANSMISSION HOUSING flange.
Q: Does this part come with a warranty?
A: As an OEM genuine ZF component, the 4657.185.011 is covered by the manufacturer’s standard 12-month warranty against material defects and workmanship errors.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
