Overview
The ZF 4657.185.113 ACCESSORIES for WG211 is a critical OEM genuine component designed to support the internal sealing and alignment functions within the WG 211 Series transmission. This accessory kit ensures that hydraulic pressure is maintained across the valve body and clutch assemblies, directly influencing shift quality and torque delivery. The SKU 4657.185.113 is engineered to exact ZF tolerances, preventing cross-contamination between oil circuits. It sits within the main control housing, working in tandem with the 4657101087: TRANSMISSION HOUSING to secure the internal architecture. Without this accessory set, the transmission cannot maintain consistent hydraulic command.
Symptoms of Failure
- Erratic shift timing and harsh engagement: When the 4657.185.113 accessories degrade, hydraulic fluid bypasses seals, causing delayed or jarring gear changes. This is a common search query for “ZF WG211 hard shifting fix.”
- External oil seepage around the housing joint: Worn accessories allow transmission fluid to escape past the 4657301172: HOUS.FRONT SECT interface, leading to visible drips and low fluid levels.
- Intermittent gear slipping under load: Loss of sealing pressure from failed accessories causes clutch packs to slip, particularly during uphill climbs or heavy towing.
- Increased operating temperature: Fluid aeration from worn accessories reduces cooling efficiency, triggering thermal warnings on the dashboard.
Technical Specifications
| Parameter | Value |
|---|---|
| OEM Part Number | 4657.185.113 |
| Material | Steel alloy with nitrile rubber seals |
| Weight | 0.45 kg (1.0 lb) |
| Dimensions (L x W x H) | 85 mm x 45 mm x 25 mm |
| Operating Temperature Range | -40°C to +120°C |
| OEM Reference | ZF 4657.185.113 |
Compatibility
This accessory set is primarily engineered for the ZF WG 211 Series transmission. Based on its design and sealing profile, it is also compatible with the WG180, WG200, and WG210 models that share the same hydraulic control architecture. It integrates directly with the 4657301173: HOUSING REAR PART to complete the assembly. For precise fitment, always verify the transmission serial number against the ZF parts catalog.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101087 | TRANSMISSION HOUSING | Main structural casing for gear and clutch assembly |
| 4657301172 | HOUS.FRONT SECT | Front section housing for pump and valve body |
| 4657301173 | HOUSING REAR PART | Rear housing supporting output shaft and bearings |
| 0631306816 | CYLINDRICAL PIN | Alignment pin for precise housing mating |
| 0636102489 | CAP SCREW | Fastener for securing housing sections |
| 4656301148 | FIXING PLATE | Retains valve body components in position |
| 0636102463 | CAP SCREW | High-tensile bolt for clutch pack retention |
| 4657201133 | SCREEN SHEET | Filter mesh preventing debris entry into oil circuits |
| 0636115287 | CAP SCREW | Fastener for oil pan attachment |
| 4657301065 | PLATE | Spacer plate for hydraulic circuit separation |
Frequently Asked Questions
Q: Can I install the 4657.185.113 accessory set without replacing the housing?
A: Yes, this kit is designed for independent replacement. However, inspect the TRANSMISSION HOUSING for cracks or wear before reassembly.
Q: Does this part require special tools for installation?
A: Standard socket and torque wrench are sufficient. The CYLINDRICAL PIN must be aligned using a drift punch to avoid damage.
Q: How often should the 4657.185.113 accessories be replaced?
A: ZF recommends replacement during major transmission overhaul intervals, typically every 300,000 km or when symptoms of failure appear.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
