Overview
The ZF 4657.230.018 is a critical OEM genuine component engineered specifically for the WG 158 Series transmission. This part functions as a precision-machined hydraulic control element, regulating oil flow and pressure within the valve body assembly to ensure smooth gear engagement and clutch modulation. The SKU 4657.230.018 sits directly in the main control bore of the WG158, interfacing with the 4656201016: HOUS.FRONT SECT to create a sealed hydraulic circuit. Without this component, the transmission cannot maintain proper line pressure, leading to erratic shifting behavior.
Symptoms of Failure
When the 4657.230.018 wears out, operators typically notice three distinct failure modes. First, delayed or harsh forward engagement occurs as the part loses its sealing integrity, causing low clutch pack pressure. Second, intermittent gear slip under load becomes apparent, particularly when climbing grades or towing heavy equipment. Third, visible oil seepage around the valve body cover develops, often mistaken for a simple gasket leak. These symptoms are frequently searched as “ZF WG158 transmission slipping when hot” or “WG200 series oil leak from valve body.”
Technical Specifications
| Specification | Detail |
|---|---|
| Part Number | 4657.230.018 |
| Material | Hardened steel with nitrile sealing surface |
| Weight | 0.42 kg (0.93 lbs) |
| Length | 78.5 mm |
| Outer Diameter | 22.3 mm |
| OEM Reference | ZF 4657.230.018 (Genuine) |
| Operating Pressure | 12-18 bar |
Compatibility
This OEM genuine part is primarily designed for the WG 158 Series transmission, but it also cross-references with several other ZF models. Compatible transmissions include the WG180, WG200, and WG210 series, provided they share the same valve body architecture. The 4657.230.018 works in concert with the 4656301142: OIL TUBE to distribute pressurized fluid, while the 0631306816: CYLINDRICAL PIN secures its alignment during assembly. For final retention, the 4656301148: FIXING PLATE locks the entire assembly into position. Always verify your transmission serial number before ordering.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4656201016 | HOUS.FRONT SECT | Front housing section for valve body mounting |
| 4656301142 | OIL TUBE | Transmits hydraulic fluid between valve body ports |
| 0631306816 | CYLINDRICAL PIN | Alignment dowel for precision component positioning |
| 4656301148 | FIXING PLATE | Retains valve body components in correct orientation |
| 0636102489 | CAP SCREW | M8 fastener for valve body cover |
| 4656301016 | SCREEN SHEET | Fine mesh filter for hydraulic circuit |
| 4656301017 | SCREEN SHEET | Coarse mesh pre-filter for oil pump |
| 0636100803 | CAP SCREW | M6 fastener for oil pan attachment |
| 0750301003 | OIL FEED.HOUSG. | Housing for main oil feed line connection |
| 0736300233 | TORX SCREW | Torx-head bolt for valve body retention |
Frequently Asked Questions
Q: Can I install the 4657.230.018 without replacing the OIL TUBE?
A: While possible, it is strongly recommended to replace the 4656301142: OIL TUBE simultaneously, as worn tubes can introduce debris that damages the new control component.
Q: How do I know if this part fits my WG200 transmission?
A: Check the valve body casting number. If it ends with “158” or “200,” the 4657.230.018 is compatible. Always verify the CYLINDRICAL PIN alignment before final assembly.
Q: What torque should I use for the FIXING PLATE screws?
A: Use 8 Nm for the 4656301148: FIXING PLATE fasteners. Over-torquing can distort the valve body bore.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
