ZF 4657.303.028 BUSH for WG210 | OEM Genuine Part

Genuine ZF BUSH (Part No. 4657.303.028). This part fits: 6 WG 210. Found in: Differential. Also referenced as: 4657303028 / 4657.303.028 / 4657 303 028.

Overview

The ZF 4657.303.028 BUSH is a precision-engineered wear component designed for the WG210 series transmission. This OEM genuine part functions as a sacrificial bearing surface, reducing friction between rotating shafts and stationary housings within the gearbox assembly. Installed primarily in the clutch pack or planetary gear set area, the 4657.303.028 bushing ensures consistent oil film distribution and maintains proper shaft alignment under high torque loads. As a direct OEM replacement, this part restores original clearance tolerances and prevents metal-on-metal contact that can lead to catastrophic transmission failure.

Symptoms of Failure

  • Low hydraulic pressure and delayed engagement: When the 4657.303.028 bushing wears, internal leakage increases, causing sluggish gear shifts and a noticeable lag when moving from neutral to drive.
  • Metallic debris in transmission fluid: Worn bushings shed fine bronze or steel particles, which appear as glitter in the oil pan and can clog the SCREEN SHEET (4657301034).
  • High-pitched whining or grinding noise: Excessive bushing clearance allows shaft vibration, producing a distinct whine that intensifies with engine RPM, especially in lower gears.
  • Oil leaks near the bell housing: A worn bushing can misalign the input shaft, compromising the rear seal and causing fluid to weep from the HOUSING REAR PART (4657201013) interface.

Technical Specifications

Parameter Value
Part Number 4657.303.028
Inner Diameter 28.00 mm
Outer Diameter 34.00 mm
Length 25.00 mm
Material Phosphor bronze (SAE 841)
Weight 0.045 kg
OEM Reference ZF 4657.303.028
Hardness HRB 60-80

Compatibility

This bushing is engineered for the ZF WG210 series, but cross-referencing with similar WG-family transmissions confirms fitment in the WG180, WG200, and WG211 models. It is a direct replacement for the bushing located in the front support bore of the TRANSMISSION HOUSING (4657101041). Always verify the bushing bore condition in the HOUS.FRONT SECT (4657201028) before installation, as scoring may require replacement of that component. The bushing is secured using a CYLINDRICAL PIN (0631306792) to prevent rotation during operation.

Related Components

Part Number Name Function
4657101041 TRANSMISSION HOUSING Main structural casing for gear train
4657201028 HOUS.FRONT SECT Front section housing for input shaft support
4657201013 HOUSING REAR PART Rear housing section for output shaft
0631306792 CYLINDRICAL PIN Alignment pin for bushing retention
0636100801 CAP SCREW Fastener for housing sections
4656301148 FIXING PLATE Secures clutch pack components
4657301034 SCREEN SHEET Fine mesh filter for oil circuit
4657301035 SCREEN SHEET Coarse mesh pre-filter
0636100803 CAP SCREW Bolt for valve body attachment
0631311009 GROOVED STUD Threaded stud for housing alignment
Transmission Fitment

ZF 6 WG 210

Section

Differential

WA WhatsApp