Overview
The ZF 5838.110.006 P.T.O. Shaft is a critical power take-off component engineered for the WG100, WG130, and WG131 transmission series. This OEM genuine part transmits rotational energy from the transmission gear train to auxiliary hydraulic pumps or driven equipment. Positioned within the rear housing assembly, the shaft interfaces directly with the differential carrier and bearing set to ensure seamless torque delivery. The SKU 5838.110.006 is precision-machined to ZF’s original tolerances, guaranteeing a direct fit without modification. When paired with the 5838109012: DIFFERENTIAL and the 0750117075: TAPER ROLLER BEARING, this shaft maintains proper gear mesh alignment and load distribution across the driveline.
Symptoms of Failure
When the 5838.110.006 P.T.O. Shaft begins to wear, operators typically notice three distinct failure indicators. First, intermittent P.T.O. engagement failure occurs when the shaft splines become worn, causing the clutch collar to slip under load. Second, metallic debris in transmission oil appears as the hardened steel surface flakes away, often accompanied by a grinding noise during P.T.O. activation. Third, vibration at specific RPM ranges develops when the shaft loses concentricity, leading to premature wear on the 2093209023: DIFFERENTIAL and the 5838300626: DIFFERENTIAL HOUSING. Left unaddressed, these symptoms escalate into complete P.T.O. inoperability and internal transmission damage.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 5838.110.006 |
| Overall Length | 245 mm |
| Shaft Diameter | 32 mm (bearing journal) |
| Spline Count | 14 involute splines |
| Material | Case-hardened alloy steel (20MnCr5) |
| Weight | 1.85 kg |
| OEM Reference | ZF 5838.110.006 |
| Surface Hardness | 58-62 HRC |
Compatibility
This P.T.O. shaft is specifically engineered for ZF WG-series transmissions. Verified compatible models include the WG100, WG130, and WG131 series. It also fits select variants of the WG180 and WG200 transmissions when equipped with the standard P.T.O. adapter housing. Always confirm your transmission serial number against the OEM parts catalog before ordering. The shaft works in concert with the 5838300811: THRUST WASHER and 5838300721: AXLE BEVEL GEAR to complete the power take-off assembly.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports shaft radial and axial loads |
| 2093209023 | DIFFERENTIAL | Secondary differential for multi-axle configurations |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses differential gears and bearings |
| 0631329088 | SPRING PIN | Secures P.T.O. shaft to shift fork |
| 5838300811 | THRUST WASHER | Controls axial clearance in shaft assembly |
| 5838300721 | AXLE BEVEL GEAR | Transfers power from differential to axle shafts |
| 5838300633 | AXLE | Transmits rotational force to wheel hubs |
| 5838300753 | THRUST WASHER | Prevents gear-to-housing contact |
| 5838300818 | THRUST WASHER | Adjusts differential side gear clearance |
Frequently Asked Questions
Q: Can the 5838.110.006 shaft be used in a WG180 transmission?
A: Yes, this shaft is compatible with WG180 transmissions that utilize the standard P.T.O. adapter. However, verify your housing casting number to ensure the spline engagement depth matches the shift collar travel.
Q: What torque specification applies to the retaining nut on this shaft?
A: The shaft retaining nut should be torqued to 180 Nm (133 ft-lbs) and staked in place. Always replace the 0631329088: SPRING PIN during reassembly to prevent the nut from backing off.
Q: How do I identify a genuine ZF shaft versus a counterfeit?
A: Genuine ZF shafts have a laser-etched part number on the shaft body near the spline end. The surface finish should be uniform matte gray with no grinding marks. Counterfeit shafts often lack the case-hardening depth and will show rapid wear within 500 operating hours.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 5838.110.006 P.T.O. SHAFT – Shaft RFQ Support
PartsZF supports RFQ preparation for ZF 5838.110.006 P.T.O. SHAFT where shaft identification and documentation review are required before ordering.
Part-Number Summary
Use ZF number 5838.110.006 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: P.T.O. SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 5838.110.006 |
|---|---|
| Normalized SKU | 5838110006 |
| Part name | P.T.O. SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
