Overview
The ZF 5838.110.015 P.T.O. SHAFT is a critical power take-off shaft engineered for the WG100, WG130, and WG131 transmission series. This OEM genuine part transmits engine torque directly from the transmission housing to auxiliary hydraulic pumps or driven equipment. Positioned within the gear train assembly, it ensures precise rotational alignment and minimal backlash during high-load operations. The SKU 5838.110.015 is machined from case-hardened steel to withstand continuous stress in construction and agricultural machinery. When paired with a robust DIFFERENTIAL assembly, this shaft maintains consistent power delivery even under variable load conditions.
Symptoms of Failure
- Oil Leaks Around the PTO Housing: Worn splines or a cracked shaft body can allow transmission fluid to seep past the seal, leaving visible drips under the vehicle.
- Gear Slipping Under Load: When the 5838.110.015 shaft loses its hardened surface, it fails to engage the mating gear properly, causing intermittent power loss during operation.
- Excessive Vibration at Idle: A bent or fatigued shaft creates harmonic imbalance, which is often felt as a shudder through the chassis when the PTO is engaged.
- Metallic Grinding Noises: Worn bearing surfaces on the shaft produce a distinct scraping sound, indicating imminent failure of the TAPER ROLLER BEARING that supports it.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number (SKU) | 5838.110.015 |
| Overall Length | 185 mm |
| Spline Diameter | 32 mm (10-spline) |
| Material | Case-Hardened Alloy Steel (20MnCr5) |
| Weight | 1.45 kg |
| OEM Reference | ZF 5838.110.015 |
| Torque Capacity | 450 Nm (max) |
Compatibility
This P.T.O. shaft is designed exclusively for ZF WG-series transmissions. It is a direct fit for the WG100, WG130, and WG131 models. While it shares the same spline geometry as the WG180 and WG200 series, those applications require a longer shaft variant. Always verify the internal clearance against your DIFFERENTIAL HOUSING before installation. For heavy-duty applications, we recommend inspecting the DIFFERENTIAL gear set simultaneously to prevent premature wear.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109009 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial shaft loads |
| 2093209023 | DIFFERENTIAL | Secondary differential for planetary axles |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses and protects gear sets |
| 0631329088 | SPRING PIN | Secures shaft alignment during assembly |
| 5838300811 | THRUST WASHER | Reduces axial friction on rotating shafts |
| 5838300721 | AXLE BEVEL GEAR | Changes torque direction in the differential |
| 5838300633 | AXLE | Transfers power to wheel hubs |
| 5838300753 | THRUST WASHER | Prevents gear end-play in the carrier |
| 5838300818 | THRUST WASHER | Controls lateral movement of the pinion shaft |
Frequently Asked Questions
Q: Can I use the 5838.110.015 shaft in a ZF WG180 transmission?
A: No. The WG180 requires a longer PTO shaft (part number 5838.110.017). Using this shorter shaft will cause incomplete gear engagement and rapid failure of the TAPER ROLLER BEARING.
Q: How do I know if my PTO shaft is worn beyond tolerance?
A: Measure the spline width with a caliper. If the spline thickness is less than 4.2 mm (new is 4.8 mm), replace the shaft immediately. Also check the THRUST WASHER for scoring marks.
Q: Does this part come with a warranty?
A: As an OEM genuine ZF part, it carries a 12-month warranty against manufacturing defects. Always pair it with a new SPRING PIN to ensure proper retention.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 5838.110.015 P.T.O. SHAFT – Shaft RFQ Support
For ZF 5838.110.015 P.T.O. SHAFT, send the part number, removed-part photos, and application context so PartsZF can prepare a focused sourcing response.
Part-Number Summary
Use ZF number 5838.110.015 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: P.T.O. SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 5838.110.015 |
|---|---|
| Normalized SKU | 5838110015 |
| Part name | P.T.O. SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
