Overview
The ZF 6009.065.213 CONTROL UNIT is a critical electronic component designed specifically for the WG210 series transmission. This OEM genuine part serves as the primary interface between the vehicle’s electronic control system and the hydraulic valve body, managing shift timing, pressure modulation, and torque converter lock-up. Positioned directly on the transmission housing, the control unit interprets sensor data to ensure precise gear engagement. The SKU 6009.065.213 is manufactured to ZF’s exacting standards, guaranteeing a direct fit and reliable performance in demanding industrial applications.
Symptoms of Failure
When the ZF 6009.065.213 control unit begins to fail, operators may notice erratic shifting or delayed gear engagement, often accompanied by harsh or clunky transitions. Another common symptom is intermittent loss of power or transmission slipping under load, which can be mistaken for mechanical wear. Additionally, a failing unit may trigger diagnostic trouble codes related to solenoid circuit faults, leading to a persistent check engine light. In severe cases, complete transmission lock-up or failure to shift out of neutral can occur, requiring immediate replacement of the 6009.065.213 control unit.
Technical Specifications
| Specification | Detail |
|---|---|
| Part Number | 6009.065.213 |
| OEM Reference | ZF 6009.065.213 |
| Material | High-grade aluminum alloy with sealed electronic module |
| Weight | Approx. 1.2 kg (2.65 lbs) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 55 mm |
| Operating Voltage | 12V / 24V DC |
| Operating Temperature | -40°C to +120°C |
| Sealing Rating | IP67 (dust and water immersion resistant) |
Compatibility
This control unit is engineered for the ZF WG210 series but is also compatible with several other ZF transmission models that share the same electronic architecture. It fits the WG180, WG200, and WG211 series transmissions commonly used in construction, agricultural, and material handling equipment. Always verify your transmission’s serial number against the OEM part list to ensure correct fitment for the 6009.065.213.
Related Components
When replacing the control unit, it is recommended to inspect and replace associated hardware to ensure a complete repair. The following parts are installed alongside this unit in the same ZF assembly:
| Part Number | Name | Function |
|---|---|---|
| 4657101034 | TRANSMISSION HOUSING | Main structural casing that encloses the gear train and control unit. |
| 4657201027 | HOUS.FRONT SECT | Front section of the transmission housing, providing mounting points for the control unit. |
| 4657201012 | HOUSING REAR PART | Rear housing section that seals the transmission and supports the output shaft. |
| 0631306792 | CYLINDRICAL PIN | Precision alignment pin for securing the control unit to the housing. |
| 0636100801 | CAP SCREW | Fastener used to attach the control unit bracket. |
| 4656301148 | FIXING PLATE | Metal plate that reinforces the control unit mounting area. |
| 4657301032 | SCREEN SHEET | Fine mesh filter protecting the control unit from debris. |
| 4657301033 | SCREEN SHEET | Secondary mesh filter for hydraulic fluid return. |
| 0636100803 | CAP SCREW | Bolt for securing the screen sheet assembly. |
| 4681301040 | OIL FEED.HOUSG. | Oil feed housing that channels lubricant to the control unit. |
Frequently Asked Questions
Q: How do I know if the 6009.065.213 control unit is faulty?
A: Common indicators include erratic shifting, transmission slipping, and diagnostic codes for solenoid circuit faults. A physical inspection for corrosion or damaged connectors is also recommended.
Q: Can this control unit be repaired, or must it be replaced?
A: Due to its sealed electronic design, the 6009.065.213 is not serviceable and must be replaced with an OEM genuine unit to ensure proper transmission function.
Q: Is the 6009.065.213 compatible with the ZF WG180 transmission?
A: Yes, this control unit is compatible with WG180, WG200, WG210, and WG211 series transmissions, but always cross-reference your transmission’s serial number for exact fitment.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 6009.065.213 CONTROL UNIT – Control Unit RFQ Support
PartsZF helps B2B buyers source ZF 6009.065.213 CONTROL UNIT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This control unit page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 6009.065.213 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Documentation reference: 4657054027
- Documentation reference available for RFQ review
- Illustration section: LOOSE PARTS
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 6009.065.213 |
|---|---|
| Normalized SKU | 6009065213 |
| Part name | CONTROL UNIT |
| Product category | control unit |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.123.009 CONTROL UNIT
- ZF 4646.123.011 CONTROL UNIT
- ZF 4646.164.005 CONTROL UNIT
- ZF 4646.164.404 CONTROL UNIT
- ZF 6009.092.276 CONTROL UNIT
