Overview
This genuine ZF 6009.065.345 CONTROL UNIT is a critical electronic module for the WG210 series transmission. It manages hydraulic valve actuation and shift timing, ensuring precise gear engagement under load. The control unit sits directly on the valve body assembly within the transmission sump, interpreting signals from the vehicle’s ECU to regulate clutch pressure. As an OEM part, SKU 6009.065.345 guarantees factory-specified performance and direct interchangeability with the original unit. When replacing this component, always inspect the TRANSMISSION HOUSING for cracks or wear that could compromise alignment.
Symptoms of Failure
- Erratic or delayed shifting – The transmission hesitates or slams into gear, especially when cold. This is a common search query for “ZF WG210 shift hesitation fix.”
- Intermittent loss of drive – The vehicle suddenly loses forward or reverse power, often accompanied by a warning light. This points directly to a failing control unit.
- Transmission fluid contamination – Internal short circuits can cause the unit to overheat, degrading seals and allowing debris into the oil. Look for burnt-smelling fluid or metal particles.
- No communication with diagnostic tools – The control unit fails to respond to scan tools, indicating a complete electronic failure. This symptom often leads to replacement of the entire assembly.
Technical Specifications
| Specification | Value |
|---|---|
| OEM Part Number | 6009.065.345 |
| Material | Die-cast aluminum housing with sealed electronics |
| Weight | 1.8 kg (approx.) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 65 mm |
| Operating Voltage | 12V DC (24V compatible variants) |
| Operating Temperature | -40°C to +120°C |
| OEM Reference | ZF 6009.065.345 |
Compatibility
This control unit is specifically designed for the ZF WG210 series, but it also fits select models in the WG180, WG200, and WG250 families when used with the correct valve body. Always verify the transmission serial number before ordering. For a full rebuild, pair this unit with the HOUS.FRONT SECT and the HOUSING REAR PART to ensure proper sealing. Additionally, the CYLINDRICAL PIN is required to align the control unit to the housing during installation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101031 | TRANSMISSION HOUSING | Main structural casing for gear sets |
| 4657201027 | HOUS.FRONT SECT | Front section housing the torque converter |
| 4657201020 | HOUSING REAR PART | Rear section supporting output shaft |
| 0631306792 | CYLINDRICAL PIN | Alignment pin for control unit mounting |
| 0636100801 | CAP SCREW | Fastener for housing assembly |
| 4656301148 | FIXING PLATE | Retains control unit to valve body |
| 4657301032 | SCREEN SHEET | Fine mesh filter for oil circuit |
| 4657301033 | SCREEN SHEET | Coarse mesh pre-filter |
| 0636100803 | CAP SCREW | Bolt for valve body cover |
| 4681301040 | OIL FEED.HOUSG. | Oil supply channel to control unit |
Frequently Asked Questions
Q: Can I use this control unit on a ZF WG180 transmission?
A: It is not directly compatible. The WG180 uses a different valve body interface. Always cross-reference the part number 6009.065.345 with your transmission’s serial plate.
Q: How do I test if the control unit is faulty before replacing it?
A: Use a multimeter to check for continuity on the main power pins. If there is no voltage output when the ignition is on, the unit is likely shorted. Also inspect the OIL FEED.HOUSG. for blockages that could cause overheating.
Q: Does this part come with a warranty?
A: As an OEM genuine part, it carries the standard ZF warranty against manufacturing defects. Installation errors or fluid contamination are not covered.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 6009.065.345 CONTROL UNIT – Control Unit RFQ Support
PartsZF helps B2B buyers source ZF 6009.065.345 CONTROL UNIT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This control unit page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 6009.065.345 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Documentation reference: 4657054038
- Documentation reference available for RFQ review
- Illustration section: LOOSE PARTS
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 6009.065.345 |
|---|---|
| Normalized SKU | 6009065345 |
| Part name | CONTROL UNIT |
| Product category | control unit |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.123.009 CONTROL UNIT
- ZF 4646.123.011 CONTROL UNIT
- ZF 4646.164.005 CONTROL UNIT
- ZF 4646.164.404 CONTROL UNIT
- ZF 6009.092.276 CONTROL UNIT
