Overview
The ZF 6009.065.418 CONTROL UNIT is a critical electronic module responsible for managing shift timing, pressure regulation, and clutch engagement within the WG210 series transmission. Positioned on the valve body assembly, this OEM genuine part interprets input from sensors and the vehicle’s ECU to ensure precise gear changes under varying load conditions. The SKU 6009.065.418 is engineered to ZF’s exacting tolerances, providing reliable communication between hydraulic and electronic systems. When paired with a robust TRANSMISSION HOUSING, this control unit maintains consistent oil flow and prevents cross-contamination of hydraulic circuits.
Symptoms of Failure
- Erratic shifting or gear hunting: A worn 6009.065.418 often causes the transmission to slip between gears or fail to hold a selected ratio, especially under moderate acceleration. This “ZF transmission control unit slipping” symptom is a common long-tail search query.
- Delayed engagement from Park to Drive: If the control unit loses calibration, drivers may experience a 2-3 second lag when shifting into gear, often accompanied by a harsh clunk.
- Intermittent limp mode activation: Faulty internal circuitry can trigger a transmission fault code, forcing the vehicle into a single-gear limp mode. This “WG210 limp mode fix” issue frequently points to the control unit.
- Oil leaks near the valve body: Cracks in the control unit’s housing or degraded seals allow ATF to weep onto the HOUS.FRONT SECT, leading to low fluid levels and overheating.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 6009.065.418 |
| Material | Reinforced polymer with aluminum heat sink |
| Weight | 1.2 kg (2.65 lbs) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 55 mm |
| OEM Reference | ZF 6009.065.418 |
| Operating Voltage | 12V DC (24V compatible with adapter) |
| Seal Type | Integrated O-ring (replacement recommended) |
Compatibility
This control unit is specifically designed for the ZF WG210 series, but it also fits WG180, WG200, and WG211 models with identical valve body interfaces. It is not compatible with Ecomat 4HP or 5HP series without adapter harnesses. For proper installation, ensure the HOUSING REAR PART is free of debris and the CYLINDRICAL PIN aligns correctly with the dowel holes to prevent misalignment.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101031 | TRANSMISSION HOUSING | Encloses gear sets and directs oil flow |
| 4657201027 | HOUS.FRONT SECT | Supports pump and torque converter interface |
| 4657201020 | HOUSING REAR PART | Holds output shaft and rear bearing assembly |
| 0631306792 | CYLINDRICAL PIN | Aligns housing sections during assembly |
| 0636100801 | CAP SCREW | Secures valve body to control unit |
| 4656301148 | FIXING PLATE | Prevents control unit vibration |
| 4657301032 | SCREEN SHEET | Filters coarse debris from hydraulic fluid |
| 4657301033 | SCREEN SHEET | Secondary filtration for fine particles |
| 0636100803 | CAP SCREW | Mounts control unit to housing |
| 4681301040 | OIL FEED.HOUSG. | Distributes pressurized oil to clutch packs |
Frequently Asked Questions
Q: Can the 6009.065.418 be repaired, or must it be replaced?
A: ZF does not authorize field repairs of this control unit due to sealed internal electronics. Replacement with the OEM genuine part is the only reliable solution to restore shift quality.
Q: How do I verify if my WG210 needs a new control unit?
A: Perform a diagnostic scan for codes like P0700 or P0741. If the unit fails a solenoid resistance test (typically 4-6 ohms per circuit), replacement is necessary. Always inspect the SCREEN SHEET for metal debris, which indicates internal wear.
Q: Does this part include the mounting hardware?
A: No. The control unit is sold as a standalone component. You will need CAP SCREW and FIXING PLATE for complete installation.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 6009.065.418 CONTROL UNIT – Control Unit RFQ Support
PartsZF helps B2B buyers source ZF 6009.065.418 CONTROL UNIT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This control unit page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 6009.065.418 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Documentation reference: 4657054043
- Documentation reference available for RFQ review
- Illustration section: LOOSE PARTS
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 6009.065.418 |
|---|---|
| Normalized SKU | 6009065418 |
| Part name | CONTROL UNIT |
| Product category | control unit |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.123.009 CONTROL UNIT
- ZF 4646.123.011 CONTROL UNIT
- ZF 4646.164.005 CONTROL UNIT
- ZF 4646.164.404 CONTROL UNIT
- ZF 6009.092.276 CONTROL UNIT
