Overview
This OEM genuine ZF 6009.065.467 CONTROL UNIT is a critical electronic module for the WG210 series transmission. It governs shift timing, pressure modulation, and clutch engagement within the valve body assembly. As the brain of the transmission, it receives signals from the vehicle’s ECU and translates them into precise hydraulic commands. The SKU 6009.065.467 is engineered to meet ZF’s exacting tolerances, ensuring seamless integration with the TRANSMISSION HOUSING and adjacent components. Replacing a worn unit restores factory shift quality and prevents cascading damage to internal parts.
Symptoms of Failure
- Erratic shifting or gear hunting — The control unit fails to process speed sensor data, causing the transmission to slip between gears or hold a gear too long. This is a common search query for “WG210 control unit failure symptoms.”
- Delayed engagement from Park to Drive — A failing 6009.065.467 may not energize solenoids quickly, resulting in a 2-3 second lag before the transmission engages. Operators often search “ZF transmission delay in gear engagement.”
- Intermittent limp mode activation — The control unit triggers a fault code and forces the transmission into a single gear. This symptom is frequently paired with searches for “WG200 electronic control unit fault.”
- Harsh or clunking shifts — Without proper pressure regulation from the control unit, clutch packs engage abruptly, leading to driveline shock and premature wear on the HOUS.FRONT SECT.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number (SKU) | 6009.065.467 |
| OEM Reference | ZF 6009.065.467 |
| Material | Die-cast aluminum housing with epoxy-sealed PCB |
| Weight | 1.2 kg (2.65 lbs) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 45 mm |
| Operating Voltage | 12V / 24V DC (vehicle-dependent) |
| Connector Type | 24-pin rectangular (AMP/TE compatible) |
| Torque Spec (mounting bolts) | 8 Nm (6 lb-ft) |
Compatibility
This control unit is primarily designed for the ZF WG210 series. It also fits select variants of the WG180, WG200, and WG211 transmissions used in medium-duty trucks, buses, and off-highway equipment. Always verify the transmission serial number before ordering. The unit interfaces directly with the HOUSING REAR PART and is secured using a CYLINDRICAL PIN for alignment. For WG200 models, check that the software revision matches your vehicle’s ECU protocol.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101031 | TRANSMISSION HOUSING | Main structural casing for gear train and valve body |
| 4657201027 | HOUS.FRONT SECT | Front section housing torque converter and pump |
| 4657201020 | HOUSING REAR PART | Rear section supporting output shaft and PTO mount |
| 0631306792 | CYLINDRICAL PIN | Alignment dowel for control unit positioning |
| 0636100801 | CAP SCREW | M8 bolt for securing control unit to housing |
| 4656301148 | FIXING PLATE | Bracket that stabilizes control unit against vibration |
| 4657301032 | SCREEN SHEET | Fine mesh filter for hydraulic fluid (upper circuit) |
| 4657301033 | SCREEN SHEET | Fine mesh filter for hydraulic fluid (lower circuit) |
| 0636100803 | CAP SCREW | M6 bolt for fixing plate attachment |
| 4681301040 | OIL FEED.HOUSG. | Pressurized oil supply channel to control unit solenoids |
Frequently Asked Questions
Q: Can the ZF 6009.065.467 be repaired, or must it be replaced?
A: Due to the sealed epoxy construction and proprietary firmware, ZF does not authorize field repairs. Replacement with this OEM genuine unit is the only reliable solution. Attempting to open the housing voids any warranty and risks damaging the TRANSMISSION HOUSING.
Q: How do I confirm this control unit fits my WG210 transmission?
A: Locate the transmission data plate on the HOUSING REAR PART. Match the serial number prefix “WG210” and verify the software version. If your unit has a 24-pin connector and uses a CYLINDRICAL PIN for alignment, this part is compatible.
Q: What other parts should I inspect when replacing the control unit?
A: Always check the SCREEN SHEET (4657301032) for debris, and replace the CAP SCREW (0636100801) and FIXING PLATE (4656301148) if they show corrosion or thread damage.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 6009.065.467 CONTROL UNIT – Control Unit RFQ Support
PartsZF helps B2B buyers source ZF 6009.065.467 CONTROL UNIT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This control unit page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 6009.065.467 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Documentation reference: 4657054039
- Documentation reference available for RFQ review
- Illustration section: LOOSE PARTS
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 6009.065.467 |
|---|---|
| Normalized SKU | 6009065467 |
| Part name | CONTROL UNIT |
| Product category | control unit |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.123.009 CONTROL UNIT
- ZF 4646.123.011 CONTROL UNIT
- ZF 4646.164.005 CONTROL UNIT
- ZF 4646.164.404 CONTROL UNIT
- ZF 6009.092.276 CONTROL UNIT
