Overview
The ZF 6009.065.569 CONTROL UNIT is the electronic brain governing shift logic and hydraulic pressure modulation within the WG210 transmission series. Mounted directly on the valve body assembly, this OEM genuine part processes input from speed sensors and throttle position to execute precise gear engagement. The SKU 6009.065.569 replaces worn or failed units to restore factory shift quality and prevent driveline damage. When paired with a robust TRANSMISSION HOUSING, this control unit ensures consistent oil flow distribution across all clutch packs.
Symptoms of Failure
- Erratic shifting or delayed engagement — The transmission hesitates before moving from Park to Drive, or hunts between gears at highway speeds.
- Harsh upshifts and downshifts — Sudden, jarring gear changes occur due to incorrect solenoid timing from a degraded control unit.
- Transmission stuck in limp mode — The WG210 locks into a single gear (usually 3rd) as a failsafe when the 6009.065.569 fails to communicate properly.
- Intermittent loss of reverse gear — Reverse engagement becomes unreliable, often accompanied by a flashing warning light on the dash.
Technical Specifications
| Parameter | Value |
|---|---|
| OEM Part Number | 6009.065.569 |
| Material | Glass-filled nylon housing with sealed electronics |
| Weight | 1.2 kg (2.65 lbs) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 65 mm |
| Operating Voltage | 12V DC (24V compatible with adapter) |
| Temperature Range | -40°C to +120°C |
| OEM Reference | ZF 6009.065.569 (Genuine) |
Compatibility
This control unit is engineered for the ZF WG210 series, but also fits WG180, WG200, and WG211 models produced after 2008. It integrates directly with the HOUS.FRONT SECT and the HOUSING REAR PART to form a sealed electronic enclosure. For mechanical alignment, use the CYLINDRICAL PIN during installation to prevent misalignment of the solenoid connectors.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101039 | TRANSMISSION HOUSING | Main structural casing for gear sets and valve body |
| 4657201028 | HOUS.FRONT SECT | Front section enclosing torque converter and pump |
| 4657201013 | HOUSING REAR PART | Rear section supporting output shaft and speed sensors |
| 0631306792 | CYLINDRICAL PIN | Alignment dowel for control unit mounting |
| 0636100801 | CAP SCREW | Fastener for securing control unit to valve body |
| 4656301148 | FIXING PLATE | Bracket that stabilizes wiring harness connections |
| 4657301034 | SCREEN SHEET | Fine mesh filter protecting solenoid inlets |
| 4657301035 | SCREEN SHEET | Secondary filter for pressure regulator circuit |
| 0636100803 | CAP SCREW | Bolt for rear housing attachment points |
| 4681301040 | OIL FEED.HOUSG. | Lubrication channel directing oil to control unit |
