Overview
The ZF 6009.092.921 CONTROL UNIT is an OEM genuine electronic module engineered specifically for the WG210 series automatic transmission. This control unit governs shift timing, pressure modulation, and torque converter lockup, ensuring precise gear engagement under varying load conditions. Positioned externally on the transmission housing, it interfaces directly with the valve body and internal solenoids. The SKU 6009.092.921 is a direct replacement for original factory units, eliminating guesswork during rebuilds or repairs. When paired with a robust TRANSMISSION HOUSING, this control unit maintains hydraulic integrity and consistent electronic communication across the drivetrain.
Symptoms of Failure
- Erratic shifting or delayed engagement: A failing control unit often causes harsh upshifts or slipping between gears, especially when the transmission is cold.
- Intermittent limp mode activation: The transmission may default to a single gear (usually 3rd) due to corrupted sensor signals from the 6009.092.921 module.
- Oil leaks near the wiring harness connector: Internal seal degradation allows ATF to seep past the control unit housing, leaving visible drips on the bell housing or HOUS.FRONT SECT.
- No communication with diagnostic tools: When the control unit fails completely, scan tools cannot read transmission codes, mimicking a dead ECU.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 6009.092.921 |
| OEM Reference | ZF 6009.092.921 |
| Material | Die-cast aluminum with sealed electronic board |
| Weight | 1.2 kg (2.65 lbs) |
| Dimensions (L x W x H) | 180 mm x 120 mm x 45 mm |
| Operating Voltage | 12V DC (nominal) |
| Operating Temperature | -40°C to +120°C |
Compatibility
This control unit is primarily designed for the ZF WG210 series, but it also fits select models in the WG180, WG200, and WG250 families due to shared electronic architecture. Always verify the connector pinout against your existing unit. For installations involving a HOUSING REAR PART (4657201103) or HOUSING REAR PART (4472239184), ensure the control unit’s mounting flange aligns with the rear housing gasket surface. The 6009.092.921 is not backward-compatible with pre-2000 WG transmissions without adapter harnesses.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101051 | TRANSMISSION HOUSING | Main structural casing that encloses gears and shafts |
| 4657201151 | HOUS.FRONT SECT | Front section housing the torque converter and pump |
| 4657201103 | HOUSING REAR PART | Rear housing supporting output shaft and tail housing |
| 4472239184 | HOUSING REAR PART | Alternate rear housing variant for extended output configurations |
| 0631306816 | CYLINDRICAL PIN | Alignment pin for precise housing-to-control unit positioning |
| 0636100801 | CAP SCREW | M8 fastener securing control unit to transmission housing |
| 4656301148 | FIXING PLATE | Bracket that stabilizes wiring harness near control unit |
| 4657301032 | SCREEN SHEET | Fine mesh filter protecting valve body from debris |
| 4657301033 | SCREEN SHEET | Secondary filter screen for auxiliary hydraulic circuits |
| 0636100803 | CAP SCREW | M10 bolt for mounting rear housing sections |
Frequently Asked Questions
Q: Can the 6009.092.921 control unit be repaired, or must it be replaced?
A: This unit is sealed and non-serviceable. Internal circuit board failures or corrosion require full replacement with an OEM genuine part to avoid intermittent faults.
Q: Will this control unit work with a WG210 transmission that has a modified valve body?
A: Yes, but only if the valve body retains factory solenoid resistance values. Aftermarket modifications may cause shift pattern errors or diagnostic trouble codes.
Q: How do I verify that my transmission uses the 6009.092.921?
A: Locate the part number on the silver label affixed to the control unit’s top cover. Cross-reference with your transmission’s serial plate—WG210 units built after 2005 typically use this module.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 6009.092.921 CONTROL UNIT – Control Unit RFQ Support
PartsZF helps B2B buyers source ZF 6009.092.921 CONTROL UNIT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This control unit page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 6009.092.921 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Documentation reference: 4657054129
- Documentation reference: 4657054149
- Documentation reference available for RFQ review
- Documentation reference: 4657054129
- Illustration section: LOOSE PARTS
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 6009.092.921 |
|---|---|
| Normalized SKU | 6009092921 |
| Part name | CONTROL UNIT |
| Product category | control unit |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.123.009 CONTROL UNIT
- ZF 4646.123.011 CONTROL UNIT
- ZF 4646.164.005 CONTROL UNIT
- ZF 4646.164.404 CONTROL UNIT
- ZF 6009.092.276 CONTROL UNIT
