Overview
The ZF 6029.201.270 CABLE GENERAL (SKU: 6029.201.270) is an OEM genuine control cable assembly designed for the WG150, WG180, and WG201 series transmissions. This component serves as the primary mechanical link between the shift lever and the transmission valve body, translating driver input into precise gear selection. It routes through the TRANSMISSION HOUSING (part 4642101109) and interfaces with the shift system to ensure smooth engagement. Constructed with a durable outer sheath and corrosion-resistant inner wire, this cable is critical for maintaining consistent shift feel and preventing unintended gear disengagement. The 6029.201.270 replaces worn or stretched cables to restore factory-specification performance in heavy-duty ZF applications.
Symptoms of Failure
- Hard shifting or gear engagement delay: A worn cable can cause binding or slack, making it difficult to shift into forward or reverse gears, especially under load.
- Transmission slipping out of gear: If the cable stretches or the end fittings corrode, the transmission may unexpectedly drop into neutral during operation.
- Oil seepage at cable entry point: Deterioration of the cable seal allows transmission fluid to leak past the TRANSMISSION HOUSING (part 4642301205), leaving visible drips on the bell housing.
- Inconsistent shift lever feel: A frayed inner wire or damaged outer jacket creates a spongy or gritty sensation when moving the shift lever, often accompanied by audible scraping.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 6029.201.270 |
| Overall Length | 1,850 mm (estimated) |
| Outer Sheath Material | Reinforced polyamide with steel braid |
| Inner Wire Material | Galvanized steel, 3.2 mm diameter |
| End Fittings | Zinc-plated steel clevis & ball joint |
| Weight | 0.85 kg (1.87 lbs) |
| OEM Reference | ZF 6029.201.270 |
| Operating Temperature | -40°C to +120°C |
Compatibility
This cable is engineered for ZF WG150, WG180, and WG201 series transmissions. It directly replaces the original equipment cable in models such as the WG150-5, WG180-6, and WG201-7. The part also fits certain WG200 variants where the shift mechanism shares the same mounting geometry. For proper installation, verify that the TYPE PLATE (part 0730365125) on your transmission housing confirms the series designation. The cable attaches to the shift tower using a GROOVED STUD (part 0631311009) and must be routed without sharp bends to prevent premature wear.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4642101109 | TRANSMISSION HOUSING | Encloses gear train and supports cable entry |
| 4642301205 | TRANSMISSION HOUSING | Alternate housing variant for WG180 series |
| 0730365125 | TYPE PLATE | Identifies transmission model and serial number |
| 0631311009 | GROOVED STUD | Secures cable end to shift lever |
| 4642301168 | SCREEN SHEET | Oil filter screen for sump |
| 4642301169 | SCREEN SHEET | Fine mesh screen for hydraulic circuit |
| 0636100621 | HEXAGON SCREW | Fastener for cable bracket |
| 4642301186 | SCREEN SHEET | Secondary filter screen |
| 4644106300 | SHIFT SYSTEM | Complete shift mechanism assembly |
| 4644306500 | COVER PLATE | Seals cable access port |
