Overview
The ZF 6029.205.562 CABLE GENERAL is a critical control interface component engineered for the WG100, WG150, and WG200 series transmissions. This OEM genuine part serves as the primary mechanical link between the operator’s shift lever and the transmission’s internal valve body, translating driver input into precise gear selection commands. As a flexible yet durable cable assembly, it routes through the TRANSMISSION HOUSING (part 4642101109) and interfaces with the shift mechanism to ensure smooth, positive engagement across all forward and reverse ranges. The SKU 6029.205.562 is manufactured to ZF’s exacting tolerances, guaranteeing consistent cable travel and minimal friction over extended service intervals.
Symptoms of Failure
- Hard shifting or gear engagement difficulty: When the cable stretches or its liner corrodes, operators report increased effort required to move the shift lever, often accompanied by a “notchy” or binding feel.
- Inaccurate gear position indication: A worn 6029.205.562 cable can cause the shift lever to indicate one gear while the transmission is actually in another, leading to unintended vehicle movement.
- Transmission slipping out of gear: Internal cable fraying or terminal end wear prevents the valve body from locking into position, causing the transmission to unexpectedly drop into neutral under load.
- Visible cable housing damage or fluid contamination: Cracks in the outer sheath allow transmission fluid to wick along the cable, creating oil leaks at the shift tower or housing interface.
Technical Specifications
| Specification | Value |
|---|---|
| Overall Length (estimated) | 1,450 mm (57.1 in) |
| Core Material | Galvanized steel wire rope |
| Outer Sheath Material | Nylon-reinforced polyurethane |
| Terminal End Type | Threaded barrel with locknut (M10 x 1.5) |
| Weight | 0.42 kg (0.93 lbs) |
| OEM Reference | ZF 6029.205.562 |
| Operating Temperature Range | -40°C to +120°C |
Compatibility
This CABLE GENERAL is specifically designed for ZF’s WG-series powershift transmissions. It is a direct fit for the WG100, WG150, and WG200 models, which are commonly found in agricultural tractors, construction loaders, and industrial material handlers. The cable interfaces with the TRANSMISSION HOUSING (part 4642301205) and is secured using a GROOVED STUD (part 0631311009). For proper identification, always verify the TYPE PLATE (part 0730365125) on your transmission to confirm series compatibility before installation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4642101109 | TRANSMISSION HOUSING | Encloses and supports gear train and valve body |
| 4642301205 | TRANSMISSION HOUSING | Alternate housing variant for WG200 series |
| 0730365125 | TYPE PLATE | Identification plate with transmission serial and model |
| 0631311009 | GROOVED STUD | Secures cable bracket to transmission housing |
| 4642301168 | SCREEN SHEET | Fine mesh filter for hydraulic circuit |
| 4642301169 | SCREEN SHEET | Alternate mesh filter for high-flow applications |
| 0636100621 | HEXAGON SCREW | Fastener for cable clamp and housing attachment |
| 4642301186 | SCREEN SHEET | Suction strainer for pump inlet protection |
| 4644106300 | SHIFT SYSTEM | Complete shift lever and detent assembly |
| 4644306500 | COVER PLATE | Seals shift mechanism access opening |
