ZF 6057.014.082 CONTROL UNIT for WG200 | OEM Genuine Part

Overview

The ZF 6057.014.082 CONTROL UNIT is a critical electronic module within the WG200 series transmission, responsible for managing hydraulic pressure modulation and shift timing. This OEM genuine part (SKU: 6057.014.082) interfaces directly with the valve body to regulate clutch engagement and gear selection. It mounts internally on the TRANSMISSION HOUSING, where it receives input from speed sensors and the vehicle’s ECU. The unit converts electrical signals into precise hydraulic commands, ensuring smooth power delivery under varying load conditions. Without this control unit, the transmission cannot execute programmed shift patterns or protect against torque converter lockup failures.

Symptoms of Failure

• Erratic shifting or delayed gear engagement — A failing control unit often causes harsh upshifts or hesitation when accelerating, especially in WG200-equipped vehicles.
• Transmission stuck in limp mode — The system may default to a single gear (usually 3rd) to prevent damage, triggered by corrupted sensor data from the 6057.014.082 unit.
• Intermittent loss of reverse gear — Faulty internal relays can prevent reverse solenoid activation, leaving the vehicle unable to back up.
• Oil pressure fluctuations — The control unit’s inability to regulate the O-RING seals in the valve body leads to inconsistent clutch pack pressure and eventual slipping.

Technical Specifications

Compatibility

This control unit is engineered for the ZF WG200 series, including WG180, WG200, and WG210 variants. It is also backward-compatible with select WG150 models using the same electronic architecture. The unit requires a COVER PLATE (part 4644301298) to seal the housing cavity against debris. For full assembly, ensure the transmission housing (4644101249 or 4644301402) is free of cracks and the O-ring (0634306323) is replaced during installation. Do not use this part with older mechanical-only ZF transmissions lacking electronic control ports.

Related Components