Overview
The ZF 6057.018.133 CONTROL UNIT is a critical electronic module for the WG211 series, governing shift timing, pressure modulation, and clutch engagement within the transmission. Positioned on the valve body assembly, this OEM genuine part interprets input from sensors and the vehicle’s ECU to ensure precise gear changes under varying load conditions. The SKU 6057.018.133 is engineered to match original factory specifications, providing reliable performance in heavy-duty industrial applications. When paired with a robust TRANSMISSION HOUSING, the control unit maintains hydraulic integrity and signal accuracy throughout the transmission’s lifecycle.
Symptoms of Failure
- Erratic gear shifting or delayed engagement: A failing control unit often causes harsh or unpredictable shifts, especially when the transmission is cold. This symptom is frequently searched as “ZF WG211 shifting problems” or “transmission hesitation under load.”
- Intermittent loss of power or limp mode activation: When the control unit misreads solenoid feedback, the transmission may default to a safe mode, reducing drivability. Users searching “WG211 limp mode fix” or “transmission control unit failure symptoms” will find this relevant.
- Transmission fluid contamination from internal shorts: Electrical failures within the control unit can generate debris or cause solenoid sticking, leading to metal particles in the oil. This is often described as “ZF transmission debris in fluid” or “control unit electrical failure.”
- No communication with diagnostic tools: A completely failed unit may prevent scan tools from reading transmission codes, a symptom commonly searched as “ZF control unit no communication” or “WG211 diagnostic error.”
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 6057.018.133 |
| Material | High-grade aluminum alloy with sealed electronics |
| Weight | 1.2 kg (2.65 lbs) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 45 mm |
| OEM Reference | ZF 6057.018.133 (Genuine) |
| Operating Voltage | 12V / 24V DC |
| Connector Type | 24-pin sealed harness |
Compatibility
This control unit is designed for the ZF WG211 series, but its electronic architecture also supports earlier WG180, WG200, and WG210 models with similar valve body configurations. It is commonly used in off-highway vehicles, construction equipment, and agricultural machinery. For proper installation, ensure the HOUS.FRONT SECT and HOUSING REAR PART are free from corrosion or warping, as these housings align the control unit with the solenoid pack. Additionally, verify the CYLINDRICAL PIN is intact to prevent misalignment during reassembly.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101049 | TRANSMISSION HOUSING | Main structural casing for gear sets and valve body |
| 4657301130 | HOUS.FRONT SECT | Front section housing for control unit and solenoids |
| 4657301131 | HOUSING REAR PART | Rear section providing oil channel sealing |
| 0631306816 | CYLINDRICAL PIN | Alignment pin for control unit mounting |
| 0636102489 | CAP SCREW | Fastener for housing assembly |
| 4656301148 | FIXING PLATE | Secures control unit to valve body |
| 0636102463 | CAP SCREW | Bolt for front housing attachment |
| 4657201133 | SCREEN SHEET | Filter mesh protecting oil passages |
| 0636115287 | CAP SCREW | Fastener for rear housing section |
| 4657301065 | PLATE | Cover plate for control unit access |
Authorized ZF Distributor
We are a certified supplier of genuine ZF components.
