Overview
The ZF 6057.018.292 CONTROL UNIT is a critical electro-hydraulic interface within the WG 171 transmission series. It serves as the central command module that directs clutch engagement and shift timing by regulating hydraulic pressure to the valve body. Positioned on the exterior of the main gearbox casing, this OEM genuine part (SKU: 6057.018.292) directly interfaces with the TRANSMISSION HOUSING to ensure precise gear selection under load. Without a fully functional control unit, the transmission cannot execute smooth ratio changes, making this component indispensable for driveline reliability in heavy-duty applications.
Symptoms of Failure
- Delayed or harsh gear engagement: When the control unit loses calibration, operators often experience a noticeable lag when shifting from neutral to drive, or abrupt clunking during gear changes.
- Erratic shift patterns under load: A failing unit may cause the transmission to hunt between gears or skip ratios entirely, particularly when climbing grades or hauling heavy payloads.
- Intermittent loss of hydraulic pressure: Internal solenoid wear can lead to fluctuating line pressure, resulting in clutch slip and elevated transmission fluid temperatures.
- Diagnostic trouble codes for shift solenoid circuits: Modern vehicles will log specific fault codes related to the control unit’s internal electronics, often accompanied by a check-engine or transmission warning light.
Technical Specifications
| Parameter | Value |
|---|---|
| OEM Part Number | 6057.018.292 |
| Material | Die-cast aluminum housing with integrated solenoid valves |
| Weight | 2.8 kg (6.2 lbs) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 95 mm |
| Operating Voltage | 12V / 24V DC (vehicle-dependent) |
| Hydraulic Ports | 6 pressure ports, 4 return ports |
| OEM Reference | ZF 6057.018.292 |
| Seal Kit Compatibility | 0634313514: O-RING |
Compatibility
This control unit is engineered primarily for the ZF WG 171 series, but its mounting pattern and hydraulic flow characteristics also make it suitable for the WG 180 and WG 200 transmission families when used with the correct adapter plate. It is not cross-compatible with the WG 150 series due to differences in the HOUS.FRONT SECT interface. For proper installation, always verify that the SCREEN SHEET and TUBE are free of debris to prevent contamination of the control unit’s internal passages.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4656101028 | TRANSMISSION HOUSING | Main structural casing that encloses the gear train and control unit |
| 4656301066 | HOUS.FRONT SECT | Front section housing that aligns the input shaft and pump drive |
| 4656201015 | SCREEN SHEET | Fine mesh filter that protects the control unit from particulate contamination |
| 4656301037 | TUBE | Hydraulic feed tube delivering pressurized oil to the control unit |
| 0634313514 | O-RING | Seals the control unit mounting flange to prevent external leaks |
| 0636100803 | CAP SCREW | M10 fastener securing the control unit to the housing |
| 4656301042 | HOUSING REAR PART | Rear housing section that supports the output shaft bearing |
| 0631306816 | CYLINDRICAL PIN | Alignment dowel for precise positioning of the control unit |
| 0636100801 | CAP SCREW | M8 fastener for the valve body cover plate |
| 0636100160 | CAP SCREW | M6 fastener for the solenoid retaining bracket |
Frequently Asked Questions
Q: Can the 6057.018.292 control unit be repaired, or must it be replaced?
A: While some internal solenoids can be individually tested and replaced, the control unit is typically replaced as a complete assembly due to the precision calibration required for the hydraulic circuits. We recommend replacement with this OEM genuine part to ensure shift quality and longevity.
Q: How do I know if my WG171 needs a new control unit versus a simple software update?
A: If you are experiencing physical symptoms such as fluid leaks from the unit’s connector or visible corrosion on the terminals, replacement is necessary. If only shift timing is off, a transmission control module (TCM) reprogramming may suffice. Always inspect the 0634313514: O-RING for damage first, as a failed seal can mimic control unit failure.
Q: Is the 6057.018.292 compatible with both 12V and 24V electrical systems?
A: Yes, this control unit is designed to operate across a wide voltage range. However, you must verify that the solenoid coil resistance matches your vehicle’s system voltage to avoid overheating. Consult your ZF service manual for specific resistance values.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 6057.018.292 CONTROL UNIT – Control Unit RFQ Support
PartsZF helps B2B buyers source ZF 6057.018.292 CONTROL UNIT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This control unit page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 6057.018.292 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Documentation reference: 4656073028
- Documentation reference available for RFQ review
- Illustration section: LOOSE PARTS
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 6057.018.292 |
|---|---|
| Normalized SKU | 6057018292 |
| Part name | CONTROL UNIT |
| Product category | control unit |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.123.009 CONTROL UNIT
- ZF 4646.123.011 CONTROL UNIT
- ZF 4646.164.005 CONTROL UNIT
- ZF 4646.164.404 CONTROL UNIT
- ZF 6009.092.276 CONTROL UNIT
