Overview
The ZF 6057.018.367 is an OEM genuine internal component engineered specifically for the WG 160 Series transmission. This precision-machined part plays a critical role in maintaining proper alignment and load distribution within the gear train assembly. As a key element of the transmission’s structural integrity, the 6057.018.367 works in concert with the TRANSMISSION HOUSING to ensure concentric rotation of shafts and gears. Without this part, the entire driveline can experience excessive vibration and premature wear. The SKU 6057.018.367 is a direct replacement unit, manufactured to ZF’s original tolerances for a precise fit.
Symptoms of Failure
- Oil leaks near the main case joint: When the 6057.018.367 degrades, sealing surfaces become compromised, leading to fluid seepage around the HOUS.FRONT SECT interface.
- Abnormal gear whine or grinding noises: Worn alignment causes gear teeth to mesh improperly, producing a high-pitched whine during acceleration or deceleration.
- Intermittent gear slipping under load: Loss of positional stability can cause the transmission to momentarily lose torque transfer, especially when climbing grades or hauling heavy loads.
- Increased metallic debris in the oil pan: As the part fractures or spalls, small metal particles circulate through the fluid, often visible during routine oil changes.
Technical Specifications
| Part Number | 6057.018.367 |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Weight | 0.85 kg (1.87 lbs) |
| Outside Diameter | 68.5 mm |
| Overall Length | 42.0 mm |
| Surface Finish | Ground & phosphate-coated |
| OEM Reference | ZF 6057.018.367 |
| Torque Capacity | Up to 1,600 Nm (application-dependent) |
Compatibility
This genuine ZF part is primarily designed for the WG 160 Series transmission family. It also fits select variants within the WG 180 and WG 200 series where the internal geometry matches. Always verify your transmission’s serial number against the OEM parts catalog. The 6057.018.367 interfaces directly with the HOUSING REAR PART and the HOUSING REAR SECTION to form a sealed, rigid assembly.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4656101056 | TRANSMISSION HOUSING | Main structural casing for gear sets |
| 4656201075 | HOUS.FRONT SECT | Front section housing input shaft bearings |
| 4656201077 | HOUSING REAR PART | Rear cover supporting output shaft |
| 4656298049 | HOUSING REAR SECTION | Intermediate rear housing segment |
| 0631306816 | CYLINDRICAL PIN | Alignment dowel for housing mating |
| 4656301148 | FIXING PLATE | Secures internal components axially |
| 0636100817 | CAP SCREW | Fastener for housing flanges |
| 4656301016 | SCREEN SHEET | Fine mesh filter for oil circuit |
| 4656301017 | SCREEN SHEET | Secondary filter screen (fine) |
| 0636100803 | CAP SCREW | Bolt for rear housing attachment |
Frequently Asked Questions
Q: How do I know if the 6057.018.367 is the correct part for my WG160?
Check the stamped serial number on your transmission’s data plate. If the model line includes WG160, WG180, or WG200, this part is likely compatible. For absolute certainty, measure the existing component’s outer diameter (68.5 mm) and length (42.0 mm) to match.
Q: Can I replace this part without removing the entire transmission?
In most cases, yes. The 6057.018.367 is accessible after removing the HOUSING REAR PART. However, you must drain the transmission fluid and support the output shaft before disassembly. A full rebuild is recommended if other internal components show wear.
Q: What is the typical service life of this OEM part?
Under normal operating conditions (highway driving, moderate loads), the 6057.018.367 can last 300,000 to 500,000 km. Severe duty cycles—such as mining or construction—may reduce this interval. Always inspect the part during any major transmission overhaul.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
