Overview
The ZF 6057.018.454 CONTROL UNIT is a precision electronic module designed to manage hydraulic actuation within the WG160 series transmission. Positioned on the valve body assembly, this OEM genuine part interprets shift commands and regulates clutch pressure for smooth gear engagement. The SKU 6057.018.454 is engineered to meet original ZF tolerances, ensuring direct plug-and-play compatibility without calibration delays. When paired with a robust TRANSMISSION HOUSING, this control unit maintains consistent oil flow to critical rotating components.
Symptoms of Failure
- Erratic shift timing or harsh engagement — A failing control unit disrupts solenoid signals, causing delayed upshifts or jarring downshifts during acceleration.
- Intermittent loss of drive in forward gears — Worn internal circuitry may cut power to the valve body, leading to temporary neutral conditions under load.
- Persistent transmission warning light — The onboard diagnostic system detects voltage irregularities from the control unit, triggering dashboard alerts even after fluid changes.
- Oil contamination in electrical connector — Degraded seals allow ATF to wick into the harness, causing corrosion and short circuits that mimic mechanical failures.
Technical Specifications
| Parameter | Value |
|---|---|
| OEM Part Number | 6057.018.454 |
| Material | Glass-filled nylon housing with brass terminals |
| Weight | 0.42 kg (0.93 lbs) |
| Dimensions (L×W×H) | 185 mm × 95 mm × 45 mm |
| Operating Voltage | 12V DC (nominal) |
| Seal Type | Integrated O-ring (replacement recommended) |
| OEM Reference | ZF 6057.018.454 |
Compatibility
This control unit is factory-specified for the WG160 series, but it also fits select variants of the WG180 and WG200 transmissions when used with the correct HOUS.FRONT SECT and HOUSING REAR PART. For WG211 and WG250 models, verify the valve body revision before installation. The unit is not compatible with pre-2005 ZF electronic architectures without adapter harnesses.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4656101055 | TRANSMISSION HOUSING | Encloses gear train and supports bearing alignment |
| 4656201075 | HOUS.FRONT SECT | Front section housing for torque converter interface |
| 4656201076 | HOUSING REAR PART | Rear housing section for output shaft support |
| 4656298047 | HOUSING REAR SECTION | Alternate rear housing casting for extended wheelbases |
| 0631306816 | CYLINDRICAL PIN | Alignment dowel for housing-to-case mating |
| 4656301148 | FIXING PLATE | Retains control unit on valve body |
| 0636100817 | CAP SCREW | M8 bolt for housing flange fastening |
| 4656301016 | SCREEN SHEET | Fine mesh filter for valve body oil gallery |
| 4656301017 | SCREEN SHEET | Coarse mesh pre-filter for pump suction |
| 0636100803 | CAP SCREW | M6 bolt for control unit bracket |
Frequently Asked Questions
Q: Can I install the 6057.018.454 control unit without replacing the HOUSING REAR SECTION?
A: Yes, the control unit mounts independently of the rear housing. However, inspect the housing for cracks if you experienced impact damage.
Q: Does this control unit require programming after installation?
A: No. The 6057.018.454 is a direct replacement with pre-loaded firmware. Cycle the ignition key three times after installation to reset adaptive learning.
Q: What torque should I use for the fixing plate bolts?
A: Tighten the FIXING PLATE screws to 8 Nm (6 ft-lbs). Over-torquing can crack the control unit housing.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 6057.018.454 CONTROL UNIT – Control Unit RFQ Support
PartsZF helps B2B buyers source ZF 6057.018.454 CONTROL UNIT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This control unit page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 6057.018.454 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Documentation reference: 4656054150
- Documentation reference available for RFQ review
- Illustration section: LOOSE PARTS
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 6057.018.454 |
|---|---|
| Normalized SKU | 6057018454 |
| Part name | CONTROL UNIT |
| Product category | control unit |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.123.009 CONTROL UNIT
- ZF 4646.123.011 CONTROL UNIT
- ZF 4646.164.005 CONTROL UNIT
- ZF 4646.164.404 CONTROL UNIT
- ZF 6009.092.276 CONTROL UNIT
