Overview
The ZF 6057.018.566 CONTROL UNIT is a precision-engineered electronic module that governs shift timing and pressure regulation within the WG 171 transmission series. Positioned directly on the valve body assembly, this OEM genuine part interprets input signals to modulate hydraulic flow, ensuring seamless gear engagement under heavy-duty loads. The SKU 6057.018.566 is specifically calibrated for the WG 171 architecture, making it a direct replacement for units suffering from electrical degradation. When paired with a robust TRANSMISSION HOUSING, the control unit maintains structural integrity against thermal expansion and vibration.
Symptoms of Failure
- Erratic gear hunting during hill climbs: A worn 6057.018.566 often causes the transmission to randomly shift between gears under load, a condition frequently searched as “ZF WG171 shifting problems.”
- Delayed forward engagement after stop: When the control unit loses calibration, operators experience a 3-5 second lag when moving from neutral to drive, commonly reported as “WG171 transmission hesitation.”
- Intermittent loss of reverse gear: Internal short circuits in the unit can cut power to reverse solenoids, leading to “ZF transmission no reverse” scenarios.
- Harsh 2-3 upshifts under partial throttle: A failing control unit fails to modulate pressure correctly, producing jarring shifts that mechanics diagnose as “ZF WG171 harsh shift.”
Technical Specifications
| Parameter | Value |
|---|---|
| OEM Part Number | 6057.018.566 |
| Material | Die-cast aluminum housing with conformal coating |
| Weight | 1.85 kg (4.08 lbs) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 55 mm |
| Operating Voltage | 12V DC (24V compatible with adapter) |
| Seal Type | Integrated gasket (use 0634313514: O-RING for replacement) |
| Fastener Torque | 12 Nm (use 0636100803: CAP SCREW for mounting) |
Compatibility
This control unit is engineered for the ZF WG 171 series but also serves as a retrofit for WG 180 and WG 200 models produced between 2008-2018. It directly replaces earlier revision 6057.018.565 units. For correct installation, the unit must be paired with a HOUS.FRONT SECT to align the hydraulic ports, and a SCREEN SHEET to filter debris from the control oil. The TUBE (4656301037) must also be inspected for cracks during replacement, as it supplies pressurized fluid to the unit.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4656101028 | TRANSMISSION HOUSING | Encloses gear train and supports control unit |
| 4656301066 | HOUS.FRONT SECT | Front section aligning valve body to pump |
| 4656201015 | SCREEN SHEET | Fine mesh filter protecting control unit ports |
| 4656301037 | TUBE | Fluid delivery conduit to control unit |
| 0634313514 | O-RING | Seals control unit to valve body |
| 0636100803 | CAP SCREW | M6 fastener for control unit mounting |
| 4656301042 | HOUSING REAR PART | Rear section supporting output shaft sensors |
| 0631306816 | CYLINDRICAL PIN | Alignment dowel for housing sections |
| 0636100801 | CAP SCREW | M8 fastener for housing assembly |
| 0636100160 | CAP SCREW | M10 fastener for bell housing |
Frequently Asked Questions
Q: Can the 6057.018.566 be repaired, or must it be replaced?
A: This control unit is a sealed electronic assembly. Internal circuit board damage from heat or vibration cannot be reliably repaired. Replacement with this OEM genuine part is the only recommended solution to restore proper shift logic.
Q: Does this control unit require programming after installation?
A: Yes. The 6057.018.566 must be calibrated to the specific WG171 transmission using ZF diagnostic software. Failure to perform this step may result in incorrect shift pressures and premature clutch wear.
Q: What is the typical lifespan of this control unit in a municipal bus application?
A: Under normal operating conditions with regular fluid changes, the unit typically lasts 5-7 years or 400,000 km. Exposure to high heat from a failing torque converter will significantly shorten this lifespan.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 6057.018.566 CONTROL UNIT – Control Unit RFQ Support
PartsZF helps B2B buyers source ZF 6057.018.566 CONTROL UNIT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This control unit page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 6057.018.566 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Documentation reference: 4656073046
- Documentation reference available for RFQ review
- Illustration section: LOOSE PARTS
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 6057.018.566 |
|---|---|
| Normalized SKU | 6057018566 |
| Part name | CONTROL UNIT |
| Product category | control unit |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.123.009 CONTROL UNIT
- ZF 4646.123.011 CONTROL UNIT
- ZF 4646.164.005 CONTROL UNIT
- ZF 4646.164.404 CONTROL UNIT
- ZF 6009.092.276 CONTROL UNIT
