Overview
The ZF 6057.018.869 EST 37 A for WG211 is a critical electro-hydraulic control unit that governs shift timing and pressure modulation within the WG series transmission. This OEM genuine part, identified by SKU 6057.018.869, sits directly on the valve body assembly and interfaces with the main housing to regulate clutch and brake actuation. It ensures precise gear engagement under varying load conditions, making it indispensable for heavy-duty industrial drivetrains. When paired with a robust TRANSMISSION HOUSING, the EST 37 A maintains hydraulic integrity and prevents cross-contamination of fluid circuits.
Symptoms of Failure
- Erratic gear hunting or delayed engagement: Worn solenoids or degraded seals inside the EST 37 A cause inconsistent shift points, especially when the transmission is cold.
- Internal hydraulic leaks: Cracks in the control body lead to low line pressure, resulting in slipping clutches and burnt transmission fluid odor.
- Intermittent neutral condition: A failing EST 37 A may lose communication with the TCU, causing the transmission to drop into neutral without warning during operation.
- Harsh or clunking shifts: When the pressure regulator fails, shift shock becomes severe, accelerating wear on the HOUS.FRONT SECT and planetary gear sets.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 6057.018.869 |
| OEM Reference | EST 37 A |
| Material | Die-cast aluminum with steel valve spools |
| Weight | 2.4 kg (5.3 lbs) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 65 mm |
| Operating Pressure | 12–18 bar |
| Seal Type | NBR (Nitrile) O-rings |
Compatibility
This EST 37 A control unit is engineered for the ZF WG211 series, but it also cross-fits select WG180, WG200, and WG250 variants that share the same valve body footprint. It is not compatible with older WG120 or WG150 models without adapter plates. For proper installation, ensure the HOUSING REAR PART is free of burrs and that the CYLINDRICAL PIN aligns the control unit precisely to prevent cross-threading of mounting bolts.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101049 | TRANSMISSION HOUSING | Main structural casing that encloses gear sets and valve body |
| 4657301130 | HOUS.FRONT SECT | Front section housing the torque converter and pump |
| 4657301131 | HOUSING REAR PART | Rear section supporting output shaft and PTO interface |
| 0631306816 | CYLINDRICAL PIN | Alignment dowel for precise housing-to-control unit fit |
| 0636102489 | CAP SCREW | M10 bolt securing the valve body to the housing |
| 4656301148 | FIXING PLATE | Retaining plate for solenoid harness connectors |
| 0636102463 | CAP SCREW | M8 bolt for mounting the EST 37 A bracket |
| 4657201133 | SCREEN SHEET | Fine mesh filter protecting control valve orifices |
| 0636115287 | CAP SCREW | M6 bolt for securing the screen sheet |
| 4657301065 | PLATE | Separator plate between valve body and housing |
Frequently Asked Questions
Q: Can the ZF 6057.018.869 be repaired, or must it be replaced?
A: While some technicians replace solenoids individually, the OEM EST 37 A is a calibrated assembly. Replacing the entire unit (SKU 6057.018.869) is recommended to avoid pressure imbalances that damage the PLATE and valve bores.
Q: What torque specification applies to the mounting cap screws?
A: Use 25 Nm for the CAP SCREW (0636102489) and 18 Nm for the smaller CAP SCREW (0636115287). Over-torquing can crack the housing.
Q: Does this part require programming after installation?
A: No. The EST 37 A is a passive hydraulic controller. However, always replace the SCREEN SHEET simultaneously to prevent debris from damaging the new unit.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
