Overview
This OEM genuine ZF 6073.017.044 TCU (Transmission Control Unit) is a critical electronic component specifically engineered for the ERGOPOWER M/L EC4A system within the WG 190 series. The TCU acts as the central processor, managing shift timing, clutch pressure, and diagnostic communication for the entire transmission assembly. By interpreting sensor data and executing precise hydraulic commands, this unit ensures smooth gear transitions and optimal fuel efficiency. The SKU 6073.017.044 is a direct replacement part, designed to restore factory performance without the need for additional programming in most applications.
Symptoms of Failure
When the ZF 6073.017.044 TCU begins to fail, operators often notice erratic shifting patterns or a complete loss of gear engagement. A common symptom is the transmission entering a “limp mode” where only one or two gears are available, severely limiting vehicle speed. Another frequent issue is delayed or harsh shifting, where the transmission hesitates before engaging a gear or slams into gear unexpectedly. Additionally, intermittent communication errors with the vehicle’s CAN bus system can trigger warning lights on the dashboard, often accompanied by a loss of cruise control functionality.
Technical Specifications
| Specification | Detail |
|---|---|
| Part Number | 6073.017.044 |
| OEM Reference | ZF ERGOPOWER M/L EC4A |
| Material | High-Grade Aluminum Alloy with Sealed Electronics |
| Weight | 1.2 kg (2.65 lbs) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 50 mm |
| Operating Voltage | 24V DC |
| Connector Type | 24-Pin Deutsch |
| Compatible Housing | 4657201161: HOUS.FRONT SECT |
Compatibility
This TCU is primarily designed for the ZF WG 190 series transmission, but it also shares compatibility with the WG 180 and WG 200 series models that utilize the ERGOPOWER M/L EC4A control architecture. It is commonly found in medium-duty trucks, buses, and specialized industrial vehicles. For proper installation, the unit must be paired with a compatible 4657101085: TRANSMISSION HOUSING and the rear assembly components such as the 4657201162: HOUSING REAR PART or the 4657298107: HOUSING REAR SECTION.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101085 | TRANSMISSION HOUSING | Main structural casing for gear assembly |
| 4657201161 | HOUS.FRONT SECT | Front section housing for input shaft |
| 4657201162 | HOUSING REAR PART | Rear housing section for output shaft |
| 4657298107 | HOUSING REAR SECTION | Alternate rear housing component |
| 0631306816 | CYLINDRICAL PIN | Alignment pin for housing assembly |
| 0636100801 | CAP SCREW | Fastener for securing housing sections |
| 4656301148 | FIXING PLATE | Mounting plate for valve body |
| 4657301032 | SCREEN SHEET | Filter screen for oil circuit |
| 4657301033 | SCREEN SHEET | Secondary filter screen |
| 0636100803 | CAP SCREW | Fastener for valve body cover |
Frequently Asked Questions
Q: Can the 6073.017.044 TCU be repaired, or does it require full replacement?
A: Due to the sealed electronic design and proprietary firmware, this unit is not serviceable. Full replacement with the OEM genuine part is the only reliable solution to restore proper transmission function.
Q: Will this TCU work with a WG 200 transmission?
A: Yes, the 6073.017.044 is compatible with WG 200 series transmissions that use the ERGOPOWER M/L EC4A system, provided the housing and connector interfaces match your specific configuration.
Q: What tools are needed for installation?
A: Basic hand tools including a socket set and torque wrench are required. You will also need a diagnostic tool to clear fault codes and perform a basic calibration after installation.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
