Overview
The ZF 6073.023.306 TCU ERGOPOWER M EC3A is a critical electronic control unit specifically engineered for the WG 171 series transmission. This OEM genuine part manages shift timing, clutch modulation, and diagnostic communication within the transmission’s valve body assembly. As the brain of the ERGOPOWER system, the TCU interprets driver input and vehicle load to optimize gear engagement. The SKU 6073.023.306 is a direct replacement for the original factory unit, ensuring seamless integration with the TRANSMISSION HOUSING and the HOUS.FRONT SECT to maintain hydraulic pressure integrity.
Symptoms of Failure
- Erratic or delayed gear engagement – When the TCU fails, the transmission may hesitate or slam into gear, particularly during cold starts or low-speed maneuvers.
- Intermittent limp mode activation – A worn 6073.023.306 unit often triggers a transmission fault code, forcing the vehicle into a reduced-power safety mode without warning.
- Oil temperature sensor misreading – Internal TCU corrosion can cause false high-temperature warnings, leading to unnecessary clutch slippage and overheating.
- No communication with diagnostic tools – A completely failed TCU will prevent scan tools from reading transmission data, making troubleshooting impossible without replacement.
Technical Specifications
| Parameter | Value |
|---|---|
| OEM Part Number | 6073.023.306 |
| Material | Die-cast aluminum housing with sealed PCB |
| Weight | 1.2 kg (2.65 lbs) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 45 mm |
| Operating Voltage | 12V / 24V DC |
| Connector Type | 40-pin AMP Junior Timer |
| OEM Reference | ZF ERGOPOWER M EC3A |
Compatibility
This TCU is primarily designed for the ZF WG 171 series, but it also fits select WG 180 and WG 200 models produced between 2008 and 2015. The unit is compatible with transmissions using the ERGOPOWER M valve body architecture. For proper installation, ensure the SCREEN SHEET is clean and the TUBE connections are free of debris to prevent oil starvation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4656101072 | TRANSMISSION HOUSING | Encloses gear sets and valve body |
| 4656301168 | HOUS.FRONT SECT | Front section housing for pump and TCU |
| 4656201015 | SCREEN SHEET | Filters hydraulic fluid entering valve body |
| 4656301037 | TUBE | Oil passage tube between pump and cooler |
| 0634313514 | O-RING | Seals tube connections against leaks |
| 0636100803 | CAP SCREW | Secures housing sections together |
| 4656301169 | HOUSING REAR PART | Rear section housing output shaft |
| 0631306816 | CYLINDRICAL PIN | Alignment pin for housing assembly |
| 0636100801 | CAP SCREW | Fastener for valve body cover |
| 0636100160 | CAP SCREW | Bolt for TCU mounting bracket |
Frequently Asked Questions
Q: Can the 6073.023.306 TCU be reprogrammed after installation?
A: Yes, this unit supports flash programming via ZF diagnostic software, but it must be performed by a qualified technician using OEM-level tools to avoid corrupting the shift maps.
Q: Does this TCU require a specific transmission fluid for proper operation?
A: Absolutely. Use only ZF LifeguardFluid 8 or equivalent synthetic fluid to ensure the TCU’s thermal sensors and solenoids function correctly. Incorrect fluid can cause premature failure.
Q: How do I verify if my WG 171 transmission needs this exact TCU?
A: Check the original part number on your current TCU label. If it matches 6073.023.306, this is the direct OEM replacement. Cross-reference with your vehicle VIN for additional confirmation.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
