Overview
This OEM genuine ZF 6073.023.315 TCU ERGOPOWER M EC3A is a critical electronic control unit specifically designed for the WG 171 Series transmission. Positioned as the brain of the gearbox, this TCU (Transmission Control Unit) manages shift timing, clutch engagement, and diagnostic feedback to ensure smooth power delivery under heavy loads. The SKU 6073.023.315 integrates directly with the valve body and harness assembly, converting sensor inputs into precise hydraulic commands. For optimal performance, this unit works in concert with the 4656101072: TRANSMISSION HOUSING, which provides structural integrity and fluid containment for the entire assembly.
Symptoms of Failure
- Erratic gear slipping under load: When the TCU fails, the transmission may hesitate or slip between gears, especially during uphill climbs or when towing heavy equipment.
- Delayed or harsh shifting: A worn 6073.023.315 unit often causes abrupt engagement or a noticeable lag when shifting from neutral to drive or reverse.
- Intermittent loss of communication: The system may trigger a “transmission fault” warning on the dashboard, with the TCU failing to relay signals to the engine control module.
- Oil overheating without mechanical cause: Faulty shift timing from the TCU can generate excessive heat, leading to premature fluid degradation and potential seal damage.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 6073.023.315 |
| OEM Reference | ZF ERGOPOWER M EC3A |
| Material | Die-cast aluminum housing with sealed electronic board |
| Weight | 1.8 kg (approx.) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 55 mm |
| Operating Voltage | 12V / 24V DC |
| Connector Type | 24-pin AMP / Deutsch compatible |
Compatibility
This TCU is engineered primarily for the ZF WG 171 Series, but it also cross-fits select models in the WG180 and WG200 families due to shared electronic architecture. It is commonly found in municipal trucks, refuse vehicles, and medium-duty construction equipment. For proper installation, ensure the 4656301168: HOUS.FRONT SECT is free of debris, and verify that the 4656201015: SCREEN SHEET is intact to prevent contamination from reaching the control unit. Additionally, the 4656301037: TUBE must be correctly routed to maintain proper fluid flow to the TCU cooling circuit.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4656101072 | TRANSMISSION HOUSING | Encloses and protects internal gear sets and fluid |
| 4656301168 | HOUS.FRONT SECT | Front section housing for pump and torque converter |
| 4656201015 | SCREEN SHEET | Filters hydraulic fluid before entering valve body |
| 4656301037 | TUBE | Routes oil to cooler and TCU cooling channels |
| 0634313514 | O-RING | Seals connections to prevent fluid leaks |
| 0636100803 | CAP SCREW | Fastens housing sections with precise torque |
| 4656301169 | HOUSING REAR PART | Rear section supporting output shaft and bearings |
| 0631306816 | CYLINDRICAL PIN | Aligns housing halves during assembly |
| 0636100801 | CAP SCREW | Secures valve body and TCU mounting brackets |
| 0636100160 | CAP SCREW | Attaches oil pan and filter assembly |
Frequently Asked Questions
Q: Can this TCU be reprogrammed for different vehicle applications?
A: Yes, the 6073.023.315 unit supports field reprogramming via ZF diagnostic software, but it must be done by a certified technician to avoid parameter corruption.
Q: What causes premature failure of the TCU in WG171 transmissions?
A: The most common cause is thermal stress from a clogged SCREEN SHEET or a failing TUBE that restricts oil flow, leading to overheating of the electronic board.
Q: Is this part a direct replacement for older ZF TCU models?
A: It is a direct fit for WG171 and some WG180 variants, but always verify the connector pinout against your existing unit. The HOUS.FRONT SECT must match the TCU mounting pattern.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
