Overview
The ZF 2093.353.004 GEARSHIFT FINGER is a precision-machined actuation component responsible for translating driver input into precise gear selection within the transmission housing. This OEM genuine part sits directly on the shift rail assembly in ZF WG100, WG130, and WG131 gearboxes, engaging with the shift forks to control the sliding gears. The SKU 2093.353.004 ensures positive engagement and prevents unintended gear disengagement under heavy load. When paired with a properly functioning 2093109024 DIFFERENTIAL, this gearshift finger maintains smooth power transfer through the drivetrain.
Symptoms of Failure
- Hard shifting or gear clash — A worn gearshift finger fails to fully engage the shift fork, causing grinding noises when selecting gears.
- Gear pop-out under load — The part loses its detent retention, allowing the transmission to slip out of gear during acceleration or deceleration.
- Excessive shift lever play — Degraded contact surfaces create slop in the shift mechanism, making it difficult to find gears accurately.
- Intermittent neutral lockout — A damaged finger may prevent the transmission from returning to a true neutral position, leading to driveline binding.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 2093.353.004 |
| Material | Case-hardened alloy steel |
| Length | 98.5 mm |
| Width | 22.0 mm |
| Height | 18.3 mm |
| Weight | 0.185 kg |
| OEM Reference | ZF 2093.353.004 |
| Surface Treatment | Phosphate coated |
Compatibility
This genuine ZF gearshift finger is engineered for the following transmission models: WG100, WG130, and WG131. It also serves as a direct replacement in certain WG180 and WG200 variants where the shift rail geometry matches. For differential support, consider the 2093209095 DIFFERENTIAL and the 2093309071 DIFF.HOUSING to complete the assembly. Always verify shift finger clearance when installing a new 0750117075 TAPER ROLLER BEARING on the main shaft.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109024 | DIFFERENTIAL | Distributes torque between output shafts |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial shaft loads |
| 2093209095 | DIFFERENTIAL | Secondary differential for multi-axle drives |
| 2093309071 | DIFF.HOUSING | Encloses differential gear set |
| 0631100223 | SPRING PIN | Secures shift finger to shift rail |
| 0730300820 | THRUST WASHER | Controls axial clearance in gear stack |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to axle shafts |
| 2097309085 | DIFFERENTIAL AXLE | Carries differential side gears |
| 5838300811 | THRUST WASHER | Reduces friction on differential gears |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Primary gear in differential set |
Frequently Asked Questions
Q: How do I know if my ZF 2093.353.004 gearshift finger is worn?
A: Inspect the contact pad for pitting or a polished groove. If the shift fork engagement feels loose or the transmission jumps out of gear under load, replacement is necessary.
Q: Can I install this part without removing the entire transmission?
A: In most WG100/WG130/WG131 models, the shift finger is accessible after removing the side cover and shift rail. However, full transmission removal is recommended for thorough inspection of the 2093109024 DIFFERENTIAL and related bearings.
Q: Does this part require any special tools for installation?
A: A spring pin punch and a torque wrench for the shift rail bolt are required. Always replace the 0631100223 SPRING PIN during installation to prevent fastener fatigue.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2093.353.004 GEARSHIFT FINGER – Shift System RFQ Support
PartsZF helps B2B buyers source ZF 2093.353.004 GEARSHIFT FINGER with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This shift system page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 2093.353.004 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: HYDR.CONTROL
- Illustration section: POWER SHIFT GROUP
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2093.353.004 |
|---|---|
| Normalized SKU | 2093353004 |
| Part name | GEARSHIFT FINGER |
| Product category | shift system |
| Cross-reference support | Available for RFQ review |
| Weight | 0.18 |
Image and Documentation Notes
Current product media status: diagram. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4656.159.018 SHIFT SYSTEM
- ZF 4681.106.006 SHIFT SYSTEM
- ZF 4644.159.307 SHIFT SYSTEM
- ZF 4644.159.338 SHIFT SYSTEM
- ZF 4646.106.024 SHIFT SYSTEM
