ZF 2095.355.023 GEARSHIFT FORK for WG100/WG130/WG131 | OEM Genuine Part

Overview

The ZF 2095.355.023 GEARSHIFT FORK is a precision-engineered actuation component designed for the WG100, WG130, and WG131 series transmissions. This OEM genuine part, identified by SKU 2095.355.023, directly engages the sliding sleeves on the mainshaft to select forward and reverse gear ratios. Positioned within the upper housing of the transmission, it translates driver input from the shift mechanism into linear motion, ensuring positive gear engagement. For optimal drivetrain integrity, this fork works in concert with the 5838109007: DIFFERENTIAL to manage torque distribution across the axle.

Symptoms of Failure

When the 2095.355.023 GEARSHIFT FORK wears, operators often report hard shifting or grinding noises during gear changes, particularly when moving from neutral into a forward gear. A second common failure symptom is gear slippage under load, where the transmission unexpectedly jumps out of gear on inclines. Third, you may notice excessive play in the shift lever accompanied by a metallic rattle, indicating fork pad wear. Finally, difficulty engaging reverse gear is a specific long-tail issue linked to fork deformation. These failures can also stress the 0750117075: TAPER ROLLER BEARING, which supports the shaft loads during shifting.

Technical Specifications

Compatibility

This GEARSHIFT FORK is engineered for the ZF WG series of powershift transmissions. It is a direct fit for the WG100, WG130, and WG131 models. While primarily designed for these three variants, it may also be compatible with the WG180 and WG200 series when used in the main gearbox section, though we recommend verifying shift rail spacing. During rebuilds, it is common to replace this fork alongside the 2095209019: DIFFERENTIAL to ensure synchronized wear patterns. Additionally, the 0631329086: SPRING PIN should be inspected for fatigue, as it secures the fork to the shift rail.

Related Components