ZF 2095.306.100 GEAR SHIFT FORK for WG100/WG130/WG131 | OEM Genuine Part

Overview

The ZF 2095.306.100 GEAR SHIFT FORK is a precision-engineered component responsible for engaging and disengaging specific gear sets within the WG100, WG130, and WG131 transmission assemblies. This OEM genuine part, identified by SKU 2095.306.100, sits directly on the shift rail inside the transmission housing, translating the driver’s gear selection into lateral movement of the synchronizer sleeves. Without this fork, the transmission cannot reliably lock gears into position, making it critical for smooth power transfer and driveline control. It works in concert with the 5838109021: DIFFERENTIAL to distribute torque evenly to the wheels.

Symptoms of Failure

• Gear grinding or hard shifting: A worn shift fork fails to fully engage the synchronizer, causing audible grinding when moving between gears—especially in lower ratios.
• Gear pop-out under load: If the fork’s pads are worn or bent, the transmission may unexpectedly jump out of gear during acceleration or deceleration.
• Sluggish or incomplete gear engagement: The shift lever feels loose or requires excessive force, and the transmission may stay in neutral despite moving the shifter.
• Metallic debris in transmission oil: Abrasion of the fork against the shift sleeve generates fine metal particles, often found during routine oil changes.

Technical Specifications

Compatibility

This genuine ZF shift fork is specifically designed for the WG100, WG130, and WG131 heavy-duty transmission series. It is also compatible with select variants of the WG180 and WG200 models where the shift fork geometry matches the synchronizer assembly. Always verify the fork’s pad thickness and rail diameter against your transmission’s service manual. For complete drivetrain rebuilds, pair this fork with the 0750117075: TAPER ROLLER BEARING and the 2095209019: DIFFERENTIAL to ensure proper shaft alignment and load distribution.

Related Components