ZF 0750.117.789 TAPERED ROLLER BEARING
ZF Part Number: 0750.117.789 (also written as 0750117789 / 0750.117.789 / 0750 117 789)
OEM Cross Reference / Interchange Numbers
ZF 0750.117.789 (TAPERED ROLLER BEARING) is the original manufacturer part. The following OEM and third-party part numbers are direct cross-references:
| Brand / OEM | Part Number | Type |
|---|---|---|
| 柳工 | SP182880 | OEM Cross Ref |
If you are looking for 柳工 SP182880, the correct ZF original part number is 0750.117.789. This is a 100% genuine ZF replacement, guaranteed to be fully compatible with 柳工 equipment that uses ZF transmissions.
Compatible ZF Transmission Models
This tapered roller bearing is used in the following ZF transmission models:
- ZF 3 WG 100(500)
- ZF 3 WG 130
- ZF 3 WG 131
- ZF 3 WG 160
- ZF 3 WG 171
- ZF 3 WG 190
- ZF 3 WG 191
- ZF 3 WG 200
- ZF 3 WG 201
- ZF 3 WG 210
- ZF 3 WG 211
- ZF 3 WG 251
- ZF 3 WG 260
- ZF 3 WG 261
- ZF 3 WG 310
…and 19 additional models. Contact us to confirm fitment for your specific unit.
Part Location in Assembly
| Section | Position No. | Qty |
|---|---|---|
| Differential | 190 | 2 |
| Differential | 390/040 | 1 |
| Differential | 440 | 2 |
| Output | 010/040 | 1 |
| Rear Axle Hous. | 150/040 | 1 |
| Rear Axle Hous. | 150/100 | 1 |
| Splitter Box | 390 | 1 |
Related Parts in Same Assembly
- 0637.101.206 — BULKHEAD UNION (Qty: 1)
- 2093.377.035 — VALVE BLOCK (Qty: 1)
- 2094.206.001 — GEARSHIFT SHAFT (Qty: 1)
- 2094.303.036 — COUNTERSHAFT (Qty: 1)
- 2094.304.054 — MAIN SHAFT (Qty: 1)
- 2094.313.068 — CLUTCH SHAFT (Qty: 1)
- 2094.352.046 — VALVE HOUSING (Qty: 1)
- 2094.306.053 — GEARSHIFT SHAFT (Qty: 1)
Frequently Asked Questions
What is ZF part number 0750.117.789?
ZF 0750.117.789 is an OEM tapered roller bearing produced by ZF Friedrichshafen AG, one of the world’s largest automotive suppliers. It is designed for use in ZF powershift transmissions, specifically in models such as 3 WG 100(500), 3 WG 130, 3 WG 131, 3 WG 160, 3 WG 171. This is a genuine ZF component, not an aftermarket reproduction.
Which ZF transmissions use 0750.117.789?
This tapered roller bearing is found in 34 ZF transmission variants, including: 3 WG 100(500), 3 WG 130, 3 WG 131, 3 WG 160, 3 WG 171, 3 WG 190, 3 WG 191, 3 WG 200, 3 WG 201, 3 WG 210. These transmissions are commonly used in wheel loaders, graders, and other heavy construction equipment. Contact us to verify fitment for your specific machine.
Where is ZF 0750.117.789 installed in the transmission?
This tapered roller bearing is located in the differential, splitter box area of the transmission. It appears in 30 different assembly configurations. In the service manual, look for position number 190 in the Differential section.
How do I look up ZF part 0750.117.789?
This part can be found under several formats: 0750117789 / 0750.117.789 / 0750 117 789. All formats refer to the same genuine ZF component. When ordering, any of these numbers will work. The official ZF catalog uses the dotted format (0750.117.789).
How do I replace ZF 0750.117.789?
Replacement of ZF 0750.117.789 should be performed by a qualified technician. Ensure the transmission is drained and the housing is properly supported before removal. Always replace bearings in pairs when possible.
What is the expected service life of ZF 0750.117.789?
Under normal operating conditions with proper lubrication, this bearing typically lasts the full transmission overhaul interval. Replace during scheduled overhauls or if abnormal noise, vibration, or increased operating temperature is detected.
Where can I buy ZF 0750.117.789?
You can purchase genuine ZF 0750.117.789 from PartsZF.com (operated by Tianjin Xiaohang Construction Machinery Co., Ltd). We maintain direct supply channels with ZF and offer worldwide shipping. Contact our parts specialists for current pricing and lead times.
Need this part? Contact our ZF parts specialist for pricing and availability. We ship worldwide with OEM quality guarantee.
