Overview
The ZF 2094.304.069 GEAR is a precision-machined helical gear designed for the intermediate shaft assembly in ZF WG100, WG130, and WG131 powershift transmissions. This OEM genuine part transmits torque between the input shaft and the output cluster, directly influencing gear ratio stability and load distribution under heavy-duty cycles. The SKU 2094.304.069 is manufactured to ZF’s original metallurgical specifications, ensuring exact tooth profile engagement and minimal backlash. It sits within the gear train, meshing with the main drive gear and supported by the 2094101014: TRANSMISSION HOUSING and the 2094301046: HOUSING to maintain proper axial alignment.
Symptoms of Failure
- Whining or howling noise during acceleration: Worn tooth flanks on the 2094.304.069 gear create irregular contact patterns, producing a distinct high-pitched sound that intensifies under load.
- Intermittent gear slipping under torque: As the gear teeth wear beyond tolerance, the transmission may momentarily lose positive engagement, causing a brief loss of drive power.
- Metallic debris in transmission oil: Flaking or pitting on the gear surface sheds fine metal particles into the lubricant, often visible during oil changes or when inspecting the 0630361034: SEALING CAP for contamination.
- Vibration in neutral or low gear: Uneven wear on the gear’s hub bore or splines induces radial runout, transmitting vibration through the 2094298053: HOUSING to the chassis.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 2094.304.069 |
| Gear Type | Helical, hardened steel |
| Number of Teeth | 32 (estimated) |
| Module | 4.5 mm (estimated) |
| Outside Diameter | 153 mm |
| Bore Diameter | 45 mm |
| Face Width | 38 mm |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Weight | 1.85 kg |
| OEM Reference | ZF 2094.304.069 |
Compatibility
This gear is engineered for ZF WG-series powershift transmissions used in construction and agricultural machinery. It is directly compatible with the following models: WG100, WG130, and WG131. It may also fit select WG180 and WG200 variants where the intermediate shaft gear set shares the same tooth count and helix angle; always verify the existing gear’s part number before replacement. The gear interfaces with the 2094301071: COVER and requires a fresh 2094301030: GASKET during installation to prevent oil seepage.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2094101014 | TRANSMISSION HOUSING | Encloses the gear train and supports bearing bores |
| 2094301046 | HOUSING | Intermediate housing for shaft alignment |
| 2094298053 | HOUSING | Rear housing providing oil sump and mounting points |
| 0630361034 | SEALING CAP | Seals the gear shaft bore against contaminants |
| 2094301071 | COVER | Access cover for gear inspection and oil fill |
| 2094301030 | GASKET | Seals the cover-to-housing interface |
| 0750111371 | SHAFT SEAL | Prevents oil leakage at the output shaft |
| 0634303085 | O-RING | Hydraulic circuit seal for clutch piston |
| 0631306670 | CYLINDRICAL PIN | Locates gear on shaft with precision |
| 0636011356 | HEXAGON SCREW | Fastens housing and cover assemblies |
ZF 2094.304.069 GEAR – Gear RFQ Support
Use ZF 2094.304.069 GEAR as the reference when requesting gear support. Photos, visible markings, and transmission context help reduce sourcing uncertainty.
Part-Number Summary
Use ZF number 2094.304.069 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: FRONT WH.DRIVE
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2094.304.069 |
|---|---|
| Normalized SKU | 2094304069 |
| Part name | GEAR |
| Product category | gear |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4661.302.010 GEAR
- ZF 2094.306.024 GEAR SHIFT RAIL
- ZF 4642.353.026 SPUR GEAR
- ZF 4143.142.013 GEAR SHIFT SENSOR
- ZF 4143.142.022 GEAR SHIFT SENSOR
