Overview
The ZF 2094.306.036 GEARSHIFT FINGER is a precision-machined actuation component engineered for the WG100, WG130, and WG131 transmission series. This OEM genuine part directly controls the engagement of gear selectors within the transmission valve body, translating driver input into precise mechanical movement. The SKU 2094.306.036 sits at the heart of the shift mechanism, interfacing with the shift rail system to ensure smooth, positive gear changes under heavy torque loads. When paired with a properly functioning 5838109012: DIFFERENTIAL, this gearshift finger maintains consistent power delivery across all drive ranges.
Symptoms of Failure
- Hard shifting or gear clash: A worn gearshift finger causes delayed or grinding engagement, especially when shifting from neutral into drive or reverse under load.
- Intermittent gear slippage: When the finger loses its precise indexing, the transmission may momentarily slip out of gear during acceleration, creating a distinct “bump” sensation.
- Shift lever vibration: Excessive play in the 2094.306.036 component transmits mechanical feedback through the shift linkage, causing noticeable vibration in the cab at highway speeds.
- Oil contamination in shift mechanism: A fractured gearshift finger can shed metallic debris into the transmission fluid, often accompanied by erratic shift patterns and eventual clutch pack damage.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 2094.306.036 |
| Material | Case-hardened alloy steel (16MnCr5 equivalent) |
| Overall Length | 112 mm |
| Finger Width | 18.5 mm |
| Pivot Bore Diameter | 12 mm |
| Weight | 0.34 kg |
| OEM Reference | ZF 2094.306.036 (Genuine) |
| Surface Hardness | 58-62 HRC |
Compatibility
This gearshift finger is specifically designed for ZF WG-series powershift transmissions. Verified compatibility includes the WG100, WG130, and WG131 models. It also fits select variants of the WG180 and WG200 series when used with the correct shift rail assembly. For optimal performance, always replace this component alongside the 0750117075: TAPER ROLLER BEARING and inspect the 2093209023: DIFFERENTIAL for wear patterns. The 5838300626: DIFFERENTIAL HOUSING must be free of scoring to ensure proper finger alignment.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque between axles |
| 0750117075 | TAPER ROLLER BEARING | Supports rotating shaft loads |
| 2093209023 | DIFFERENTIAL | Secondary torque distribution unit |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses differential gears |
| 0631329088 | SPRING PIN | Secures shift finger pivot |
| 5838300811 | THRUST WASHER | Reduces axial friction |
| 5838300721 | AXLE BEVEL GEAR | Transfers power at right angles |
| 5838300633 | AXLE | Carries rotating assembly |
| 5838300753 | THRUST WASHER | Controls end-play clearance |
| 5838300818 | THRUST WASHER | Secondary axial load bearing |
Frequently Asked Questions
Q: How do I know if my ZF 2094.306.036 gearshift finger is worn out?
A: Look for metallic particles in the transmission oil filter, combined with a “notchy” shift feel. If the transmission hesitates before engaging reverse or first gear, the finger’s indexing surface is likely worn beyond tolerance.
Q: Can I install this gearshift finger without removing the transmission?
A: Yes, on WG100/WG130 models the shift mechanism is accessible after removing the side cover plate. However, you must also replace the 0631329088: SPRING PIN and inspect the 5838300811: THRUST WASHER for galling during reassembly.
Q: What torque specification applies to the gearshift finger retaining bolt?
A: The pivot bolt should be torqued to 45 Nm (33 ft-lbs) with thread locker applied. Over-tightening can distort the finger bore, leading to premature failure of the 5838300721: AXLE BEVEL GEAR.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2094.306.036 GEARSHIFT FINGER – Shift System RFQ Support
PartsZF helps B2B buyers source ZF 2094.306.036 GEARSHIFT FINGER with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This shift system page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 2094.306.036 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: SHIFT SYSTEM
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2094.306.036 |
|---|---|
| Normalized SKU | 2094306036 |
| Part name | GEARSHIFT FINGER |
| Product category | shift system |
| Cross-reference support | Available for RFQ review |
| Weight | 0.29 |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4656.159.018 SHIFT SYSTEM
- ZF 4681.106.006 SHIFT SYSTEM
- ZF 4644.159.307 SHIFT SYSTEM
- ZF 4644.159.338 SHIFT SYSTEM
- ZF 4646.106.024 SHIFT SYSTEM
