Overview
The ZF 2094.306.056 GEARSHIFT FINGER is a precision-machined actuation component responsible for translating driver input into precise gear engagement within the WG100, WG130, and WG131 transmission families. Positioned inside the shift mechanism housing, this OEM genuine part interfaces directly with the shift rails and forks to ensure smooth, positive gear selection. The SKU 2094.306.056 is manufactured to ZF’s original tolerances, guaranteeing reliable operation under heavy-duty cycles. When paired with a properly maintained DIFFERENTIAL assembly, this gearshift finger helps maintain consistent power delivery and driveline synchronization.
Symptoms of Failure
- Hard shifting or gear clash: A worn gearshift finger loses its precise indexing, causing difficulty when moving between gears, especially under load.
- Intermittent gear slip-out: When the finger’s engagement surface wears, it may fail to hold the shift rail in position, leading to unexpected neutral drops during operation.
- Excessive shift lever play: A degraded finger introduces slop in the shift linkage, making the gear lever feel loose or unresponsive.
- Metallic grinding noises from the shift housing: Worn contact points on the finger can create abnormal friction, producing audible grinding during gear changes.
Technical Specifications
| Specification | Detail |
|---|---|
| Part Number | 2094.306.056 |
| Material | Case-hardened alloy steel |
| Weight | 0.35 kg (0.77 lbs) |
| Length | 95 mm |
| Width | 28 mm |
| Height | 22 mm |
| OEM Reference | ZF 2094.306.056 |
| Surface Treatment | Phosphate coating for corrosion resistance |
Compatibility
This genuine ZF gearshift finger is engineered for the WG100, WG130, and WG131 transmission models. It is also compatible with select variants of the WG180 and WG200 series that share the same shift mechanism architecture. For optimal performance, always verify the shift finger’s condition when servicing the TAPER ROLLER BEARING and DIFFERENTIAL components within the same assembly. The DIFF.HOUSING should also be inspected for wear during any major transmission overhaul.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109008 | DIFFERENTIAL | Distributes torque between output shafts |
| 0750117075 | TAPER ROLLER BEARING | Supports rotating shafts under axial and radial loads |
| 2093209096 | DIFFERENTIAL | Secondary differential unit for multi-axle configurations |
| 2093309073 | DIFF.HOUSING | Encloses and protects differential gears |
| 0631100223 | SPRING PIN | Secures shift components to prevent axial movement |
| 0730300820 | THRUST WASHER | Reduces friction between rotating and stationary parts |
| 4482360002 | AXLE BEVEL GEAR | Transmits power at a right angle within the differential |
| 2097309085 | DIFFERENTIAL AXLE | Carries differential side gears and spider gears |
| 5838300811 | THRUST WASHER | Provides wear surface for differential gear thrust faces |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Primary gear for torque splitting in the differential |
Frequently Asked Questions
Q: How do I know if the ZF 2094.306.056 gearshift finger needs replacement?
A: If you experience vague shift feel, gears popping out of engagement, or unusual resistance when moving the shift lever, the finger’s contact surfaces may be worn. Inspect the part for visible pitting or deformation.
Q: Can I install this gearshift finger without removing the entire transmission?
A: In most WG-series transmissions, the shift mechanism cover can be accessed with the transmission in the vehicle. However, proper alignment of the finger with the shift rails is critical, and we recommend consulting the ZF service manual for your specific model.
Q: Is this part compatible with aftermarket shift kits?
A: The OEM 2094.306.056 finger is designed to work with factory shift components. Using aftermarket shift kits may require additional modifications to ensure correct indexing and clearance.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2094.306.056 GEARSHIFT FINGER – Shift System RFQ Support
PartsZF helps B2B buyers source ZF 2094.306.056 GEARSHIFT FINGER with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This shift system page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 2094.306.056 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: SHIFT SYSTEM
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2094.306.056 |
|---|---|
| Normalized SKU | 2094306056 |
| Part name | GEARSHIFT FINGER |
| Product category | shift system |
| Cross-reference support | Available for RFQ review |
| Weight | 0.34 |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4656.159.018 SHIFT SYSTEM
- ZF 4681.106.006 SHIFT SYSTEM
- ZF 4644.159.307 SHIFT SYSTEM
- ZF 4644.159.338 SHIFT SYSTEM
- ZF 4646.106.024 SHIFT SYSTEM
