Overview
The ZF 2095.306.016 GEARSHIFT FINGER is a precision-machined actuation component located within the valve body and shift rail assembly of heavy-duty ZF transmissions. This OEM genuine part, identified by SKU 2095.306.016, directly engages the shift forks to select forward and reverse gears. When the driver moves the gear lever, the shift finger rotates to push the appropriate shift rail, translating mechanical input into gear engagement. It is a critical wear item in the WG100, WG130, and WG131 series, where repeated cycling can cause surface degradation. For optimal drivetrain performance, this component works in concert with the 5838109021: DIFFERENTIAL to ensure smooth torque distribution.
Symptoms of Failure
- Hard shifting or gear clash: A worn shift finger tip fails to fully engage the shift rail, causing grinding noises when selecting gears. This is a common symptom in high-mileage WG130 units.
- Intermittent gear slipping: If the finger’s contact surface is pitted or chipped, the transmission may pop out of gear under load, especially in reverse.
- Stuck in neutral: A broken or severely worn shift finger can prevent the shift rail from moving, leaving the transmission unable to engage any gear.
- Increased shift lever play: Excessive clearance at the finger-to-rail interface results in a sloppy, imprecise shifter feel.
Technical Specifications
| Specification | Value |
|---|---|
| OEM Part Number | 2095.306.016 |
| Material | Case-hardened alloy steel |
| Overall Length | 68.5 mm |
| Finger Width | 14.2 mm |
| Bore Diameter | 10.0 mm |
| Weight | 0.12 kg |
| Surface Hardness | HRC 58-62 |
| Compatible Shift Rail | WG100/WG130/WG131 |
Compatibility
This genuine ZF 2095.306.016 shift finger is engineered for the following transmission models: WG100, WG130, WG131. It is also compatible with select variants of the WG180 and WG200 series that share the same shift rail geometry. Always verify the shift rail slot dimensions before installation. During rebuilds, pairing this finger with a new 0750117075: TAPER ROLLER BEARING ensures proper shaft alignment. Additionally, the 2095209019: DIFFERENTIAL and 0631329086: SPRING PIN are frequently replaced during the same service interval to prevent secondary failures.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109021 | DIFFERENTIAL | Distributes torque between output shafts |
| 0750117075 | TAPER ROLLER BEARING | Supports rotating shaft loads |
| 2095209019 | DIFFERENTIAL | Rear differential assembly component |
| 0631329086 | SPRING PIN | Secures shift finger to actuator shaft |
| 5838300817 | THRUST WASHER | Controls axial clearance in gear sets |
| 5838300682 | DIFFERENTIAL AXLE | Cross shaft for differential spider gears |
| 5838300811 | THRUST WASHER | Steel-backed washer for planetary gears |
| 5841302064 | THRUST WASHER | Bronze-faced washer for clutch packs |
| 5838300812 | SEALING RING | Prevents fluid bypass in hydraulic circuits |
| 5838300137 | OUTER CLUTCH DISK | Friction plate for clutch engagement |
ZF 2095.306.016 GEARSHIFT FINGER – Shift System RFQ Support
PartsZF helps B2B buyers source ZF 2095.306.016 GEARSHIFT FINGER with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This shift system page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 2095.306.016 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: SHIFT SYSTEM
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2095.306.016 |
|---|---|
| Normalized SKU | 2095306016 |
| Part name | GEARSHIFT FINGER |
| Product category | shift system |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4656.159.018 SHIFT SYSTEM
- ZF 4681.106.006 SHIFT SYSTEM
- ZF 4644.159.307 SHIFT SYSTEM
- ZF 4644.159.338 SHIFT SYSTEM
- ZF 4646.106.024 SHIFT SYSTEM
