Overview
The ZF 2095.355.015 GEARSHIFT SHAFT is a precision-machined component designed to transfer driver input directly into the gear selection mechanism within ZF heavy-duty transmissions. Positioned inside the transmission housing, this shaft engages with the shift forks and selector rails to enable smooth, reliable gear engagement across all forward and reverse ranges. As an OEM genuine part, SKU 2095.355.015 guarantees exact fitment and factory-specified tolerances, eliminating the guesswork associated with aftermarket alternatives. When paired with a properly maintained 5838109012: DIFFERENTIAL, this shaft ensures consistent power delivery from the transmission to the axles.
Symptoms of Failure
- Hard shifting or gear clash: A worn gearshift shaft often causes difficulty moving the lever into gear, accompanied by grinding noises during engagement.
- Unexplained transmission oil leaks: Deterioration of the shaft seal surface leads to fluid seepage around the shift tower, leaving puddles under the vehicle.
- Gear slippage under load: Excessive play in the shaft prevents full fork travel, causing the transmission to pop out of gear during acceleration or hill climbs.
- Loose or sloppy shift lever feel: Increased radial clearance in the shaft bushing creates a vague, imprecise shifter movement that worsens over time.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 2095.355.015 |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Overall Length | 285 mm (estimated) |
| Shaft Diameter | 25 mm (bearing journal) |
| Weight | 1.8 kg (4.0 lbs) |
| OEM Reference | ZF 2095.355.015 |
| Surface Finish | Ground and polished, 0.8 µm Ra |
Compatibility
This gearshift shaft is engineered for ZF WG100, WG130, and WG131 series transmissions commonly found in medium-duty trucks, buses, and off-highway equipment. While primarily designed for these models, the shaft may also be compatible with earlier WG80 and WG90 variants where shift tower geometry matches. For optimal performance, always inspect the mating 0750117075: TAPER ROLLER BEARING and 2093209023: DIFFERENTIAL during installation to prevent premature wear. The shaft also interfaces directly with the 5838300626: DIFFERENTIAL HOUSING in certain configurations, so verify housing alignment before reassembly.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports shaft radial and axial loads |
| 2093209023 | DIFFERENTIAL | Secondary torque distribution unit |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses differential gear set |
| 0631329088 | SPRING PIN | Secures shift fork to shaft |
| 5838300811 | THRUST WASHER | Controls axial clearance in gear train |
| 5838300721 | AXLE BEVEL GEAR | Transfers power to axle shafts |
| 5838300633 | AXLE | Drives wheel hub assembly |
| 5838300753 | THRUST WASHER | Reduces friction in planetary set |
| 5838300818 | THRUST WASHER | Adjusts differential preload |
Frequently Asked Questions
Q: How do I know if my ZF WG100 needs a new gearshift shaft?
A: If you experience persistent hard shifting, oil leaks around the shift tower, or a loose shifter feel that worsens with temperature changes, inspect the shaft for wear at the seal journal and fork engagement grooves. Replacing the shaft along with the 0750117075: TAPER ROLLER BEARING often restores factory shift quality.
Q: Can I install this shaft without removing the transmission?
A: In most WG130 and WG131 applications, the gearshift shaft can be replaced by accessing the shift tower from above after removing the cab floor plate. However, if the 5838300626: DIFFERENTIAL HOUSING obstructs access, partial transmission removal may be necessary.
Q: Is the 2095.355.015 shaft compatible with aftermarket shift forks?
A: While the shaft dimensions are standardized, we strongly recommend using OEM-spec shift forks and the 0631329088: SPRING PIN to maintain proper engagement depth and prevent premature wear.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2095.355.015 GEARSHIFT SHAFT – Shift System RFQ Support
PartsZF helps B2B buyers source ZF 2095.355.015 GEARSHIFT SHAFT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This shift system page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 2095.355.015 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: REMOTE CONTROL
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2095.355.015 |
|---|---|
| Normalized SKU | 2095355015 |
| Part name | GEARSHIFT SHAFT |
| Product category | shift system |
| Cross-reference support | Available for RFQ review |
| Weight | 0.87 |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4656.159.018 SHIFT SYSTEM
- ZF 4681.106.006 SHIFT SYSTEM
- ZF 4644.159.307 SHIFT SYSTEM
- ZF 4644.159.338 SHIFT SYSTEM
- ZF 4646.106.024 SHIFT SYSTEM
