ZF 4061.313.113 OUTER CLUTCH DISK for WG200 | OEM Genuine Part

Overview

The ZF 4061.313.113 OUTER CLUTCH DISK is a critical friction component engineered for the WG 200 series powershift transmissions. This OEM genuine part sits within the clutch pack assembly, specifically on the outer circumference of the clutch drum, where it engages with the housing to transfer torque during gear shifts. As a wear item, the outer clutch disk ensures smooth engagement and disengagement of planetary gear sets. The SKU 4061.313.113 is the direct replacement for original ZF factory specifications, guaranteeing precise fitment and material composition for heavy-duty industrial applications.

Symptoms of Failure

• Delayed or harsh gear engagement: When the outer clutch disk wears thin, you may notice a pronounced lag or a jarring shift when selecting forward or reverse, especially under load.
• Transmission slipping under load: A worn 4061.313.113 disk loses its friction coefficient, causing the transmission to slip or lose power transfer when climbing grades or moving heavy equipment.
• Burning smell or dark fluid contamination: Excessive heat from friction material breakdown produces a distinct burnt odor and turns the transmission fluid dark, indicating the outer clutch disk is failing.
• Intermittent loss of drive in specific gears: If the disk delaminates or cracks, you may experience a sudden loss of power to the wheels, particularly in higher gear ranges.

Technical Specifications

Compatibility

This outer clutch disk is specifically designed for the ZF WG 200 series transmission family. It is directly compatible with models including the WG180, WG200, and WG210 powershift transmissions commonly found in industrial loaders, forklifts, and material handling equipment. The 4061.313.113 disk is also used in certain ZF Ergopower and ZF Ecomix variants that share the same clutch pack architecture. Always verify your transmission serial number against ZF documentation before installation.

During a clutch pack rebuild, this outer disk is typically installed alongside the 4460115043: HOUSING which encloses the clutch assembly, and the 4469315012: AXLE DRIVE HOUSING that transfers power to the driveline. Proper bearing support is critical; use the 0750117406: TAPER ROLLER BEARING for the input shaft and the 0750117802: TAPERED ROLLER BEARING for the output shaft to maintain axial alignment and prevent premature disk wear.

Related Components