Overview
The ZF 4143.325.075 HOUSING is a critical structural component engineered for the HL 100 and HL 270 series transmissions. This OEM genuine part serves as the primary enclosure that supports the gear train and hydraulic valve body, ensuring precise alignment under high torque loads. The SKU 4143.325.075 is machined from high-grade cast iron to withstand thermal expansion and mechanical stress. When installed, it integrates directly with the 4143101016 HOUSING to form a sealed assembly that directs oil flow to clutches and bearings. Without this housing, the transmission cannot maintain internal pressure or protect rotating components from debris.
Symptoms of Failure
- Oil leaks at the mating surface: A cracked or warped 4143.325.075 housing often causes fluid seepage between the main casing and the 4143301039 HOUSING, leading to low oil levels and eventual gear slipping.
- Abnormal gear engagement noise: When the housing loses dimensional stability, bearing bores become misaligned, producing a grinding or whining sound during shifts.
- Erratic hydraulic pressure: Internal cracks in the housing disrupt oil galleries, causing delayed clutch pack engagement or sudden loss of drive.
- Contaminated transmission fluid: A fractured housing allows external grit to enter the system, accelerating wear on the 0501318136 GASKET and valve body components.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 4143.325.075 |
| Material | GJL-250 Gray Cast Iron |
| Weight | 8.7 kg (19.2 lbs) |
| Length | 410 mm |
| Width | 280 mm |
| Height | 175 mm |
| Bolt Hole Pattern | 12 x M12 on 320 mm PCD |
| OEM Reference | ZF 4143.325.075 |
| Sealing Surface Roughness | Ra 1.6 µm |
Compatibility
This housing is specifically designed for ZF HL 100 and HL 270 series transmissions. It is also compatible with the following models that share the same bolt pattern and oil gallery layout: WG180, WG200, WG210, and WG250. The part interfaces directly with the 0636101084 CAP SCREW kit for secure mounting. For proper sealing, always replace the 0501318136 GASKET during installation. Do not use this housing with pre-1990 ZF models without verifying the dowel pin alignment.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4143101016 | HOUSING | Main transmission casing |
| 4143301039 | HOUSING | Rear cover housing |
| 0501318136 | GASKET | Seals housing joints |
| 0636101084 | CAP SCREW | Fastens housing sections |
| 0750108044 | PLUG | Closes oil passages |
| 0636302014 | SCREW PLUG | Drain port seal |
| 0634801057 | SEALING RING | Prevents thread leaks |
| 0730365092 | TYPE PLATE | Identification label |
| 4143201019 | VALVE INSERT | Hydraulic control seat |
| 0634306198 | O-RING | Fluid seal for inserts |
Authorized ZF Distributor
We are a certified supplier of genuine ZF components.
