ZF 0634.801.045 SEALING RING
ZF Part Number: 0634.801.045 (also written as 0634801045 / 0634.801.045 / 0634 801 045)
OEM Cross Reference / Interchange Numbers
ZF 0634.801.045 (SEALING RING) is the original manufacturer part. The following OEM and third-party part numbers are direct cross-references:
| Brand / OEM | Part Number | Type |
|---|---|---|
| 柳工 | SP107543 | OEM Cross Ref |
If you are looking for 柳工 SP107543, the correct ZF original part number is 0634.801.045. This is a 100% genuine ZF replacement, guaranteed to be fully compatible with 柳工 equipment that uses ZF transmissions.
Compatible ZF Transmission Models
This sealing ring is used in the following ZF transmission models:
- ZF 3 WG 200
- ZF 4 WG 180
- ZF 4 WG 200(555)
- ZF 4 WG 200(555/5)
- ZF 4 WG 65
- ZF 4 WG 65 II(D)
- ZF 4 WG 92
- ZF 4 WG 98
- ZF 4 WG 98 PS
- ZF 6 WG 150
- ZF 6 WG 180(500)
- ZF 6 WG 180(555)
- ZF 6 WG 200(500)
- ZF 6 WG 200(555)
- ZF 6 WG 200(555/4)
…and 4 additional models. Contact us to confirm fitment for your specific unit.
Part Location in Assembly
| Section | Position No. | Qty |
|---|---|---|
| Clutch | 194/020 | 2 |
| Coupling | 052/020 | 2 |
| Coupling | 194/020 | 2 |
| Differential | 390 | 1 |
| Disconnection | 05.170 | 1 |
| Disconnection | 170 | 1 |
| Housing | 090 | 1 |
| Housing | 250 | 1 |
| Kuppl.Betaet | 100 | 1 |
| Kuppl.Betaet | 270 | 6 |
| Oil Supply | 050 | 1 |
| Oil Supply | 070 | 2 |
Related Parts in Same Assembly
- 5838.300.288 — CLUTCH BELL HOUSING (Qty: 1)
- 0501.222.007 — VALVE BLOCK (Qty: 1)
- 0501.325.280 — SOLENOID VALVE (Qty: 1)
- 0501.327.379 — O-RING (Qty: 1)
- 0501.327.378 — O-RING (Qty: 1)
- 0501.327.380 — O-RING (Qty: 1)
- 0501.327.381 — SCREW (Qty: 1)
- 0750.117.075 — TAPER ROLLER BEARING (Qty: 2)
Frequently Asked Questions
What is ZF part number 0634.801.045?
ZF 0634.801.045 is an OEM sealing ring produced by ZF Friedrichshafen AG, one of the world’s largest automotive suppliers. It is designed for use in ZF powershift transmissions, specifically in models such as 3 WG 200, 4 WG 180, 4 WG 200(555), 4 WG 200(555/5), 4 WG 65. This is a genuine ZF component, not an aftermarket reproduction.
Which ZF transmissions use 0634.801.045?
This sealing ring is found in 19 ZF transmission variants, including: 3 WG 200, 4 WG 180, 4 WG 200(555), 4 WG 200(555/5), 4 WG 65, 4 WG 65 II(D), 4 WG 92, 4 WG 98, 4 WG 98 PS, 6 WG 150. These transmissions are commonly used in wheel loaders, graders, and other heavy construction equipment. Contact us to verify fitment for your specific machine.
Where is ZF 0634.801.045 installed in the transmission?
This sealing ring is located in the housing, kuppl.betaet, p.t.o. shaft area of the transmission. It appears in 30 different assembly configurations. In the service manual, look for position number 194/020 in the Clutch section.
How do I look up ZF part 0634.801.045?
This part can be found under several formats: 0634801045 / 0634.801.045 / 0634 801 045. All formats refer to the same genuine ZF component. When ordering, any of these numbers will work. The official ZF catalog uses the dotted format (0634.801.045).
When should I replace ZF 0634.801.045?
Replace this seal during every transmission overhaul or if you notice oil leakage at the seal location. Seals are wear items and should not be reused after removal.
Can I reuse ZF 0634.801.045 after disassembly?
No. ZF recommends always installing new seals during reassembly. Reusing seals may result in leaks and premature failure.
Where can I buy ZF 0634.801.045?
You can purchase genuine ZF 0634.801.045 from PartsZF.com (operated by Tianjin Xiaohang Construction Machinery Co., Ltd). We maintain direct supply channels with ZF and offer worldwide shipping. Contact our parts specialists for current pricing and lead times.
Need this part? Contact our ZF parts specialist for pricing and availability. We ship worldwide with OEM quality guarantee.
